# Free 100-140 practice questions

> 10 free 100-140 practice questions with the correct answer and an explanation.

Page: https://devopscodelab.com/exams/cisco-100-140/free-practice-questions/
Practice exams: https://devopscodelab.com/exams/cisco-100-140/

### Question 1 of 10

A tier 1 technician has followed every knowledge base article for a recurring VPN authentication error and has spent the agreed maximum time on the ticket without resolving it. What should the technician do NEXT?

- A. Reinstall the operating system on the user's laptop to rule out any software corruption issues
- B. Close the ticket and ask the user to open a new one if the VPN error happens again next week
- C. Escalate the ticket to tier 2 with a summary of the symptoms, steps already tried, and results
- D. Keep working on the ticket until it is fixed, because escalating it would reflect badly on tier 1

**Answer:** C

**Explanation:** When tier 1 options and the time limit are exhausted, the ticket is escalated with full documentation so tier 2 does not repeat steps. Closing an unresolved ticket hides the problem and frustrates the user. Reinstalling the OS is a drastic, unauthorized step that may not address an authentication fault. Holding a ticket past the agreed limit violates the escalation process and delays resolution.

### Question 2 of 10

A help desk technician has six open tickets. One reports that the payroll server is unreachable for the whole finance department on payday, and the others are single-user requests such as a new mouse and a desktop wallpaper change. Which ticket should the technician work on FIRST?

- A. The payroll server outage, because it affects many users and a time-critical business process
- B. The new mouse request, because it can be closed quickly and reduces the size of the open queue
- C. The wallpaper change, because the user submitted it with the highest priority flag in the portal
- D. The oldest ticket in the queue, because first-in first-out ordering is always fair to every user

**Answer:** A

**Explanation:** Prioritization is based on impact (how many users) and urgency (business deadline), so a department-wide payroll outage on payday comes first. Closing quick tickets to shrink the queue ignores impact. Strict first-in first-out ordering lets low-impact tickets delay critical outages. A user-chosen priority flag on a cosmetic request does not outweigh actual business impact.

### Question 3 of 10

A user says their wireless mouse moves the cursor erratically and sometimes stops responding. The USB receiver is plugged in and the mouse light is dim. What should the technician try FIRST?

- A. Update the motherboard firmware
- B. Replace the USB receiver's port
- C. Reinstall the operating system
- D. Replace the mouse's batteries

**Answer:** D

**Explanation:** A dim indicator and erratic behaviour are classic signs of low batteries in a wireless mouse, so replacing them is the quickest, least invasive first step. Reinstalling the OS and updating firmware are disruptive and unlikely to help. A port replacement is a repair, not a first step, and the receiver is already detected.

### Question 4 of 10

A monitor connected to a desktop shows 'No signal'. The monitor powers on and the computer is running. What should the technician check FIRST?

- A. The keyboard layout configured in the operating system settings
- B. The amount of free disk space on the computer's system drive
- C. The video cable connections and the monitor's selected input source
- D. The power plan selected in the operating system's control panel

**Answer:** C

**Explanation:** 'No signal' means the monitor is not receiving video on the selected input, so the cable and the input source are checked first. Free disk space and keyboard layout do not affect video output. A power plan could put the display to sleep, but checking physical connections and input selection is the simpler first step.

### Question 5 of 10

A remote employee connects to the company VPN successfully but cannot reach internal websites by name. Public websites work. Which issue is MOST likely?

- A. The employee's home router has no internet connection at all
- B. The employee's password expired before the VPN connected
- C. The VPN is not supplying the internal DNS servers to the client
- D. The laptop's Wi-Fi adapter does not support WPA3 encryption on the home network

**Answer:** C

**Explanation:** If internal names fail while the VPN is up and the internet works, the client is likely still using public DNS servers that cannot resolve internal names. A home router without internet would stop public websites too. Wi-Fi encryption support does not affect name resolution. An expired password would have prevented the VPN from connecting.

### Question 6 of 10

A laptop connects to the office Wi-Fi with the correct password but immediately shows 'Can't connect to this network'. The office uses WPA3-Enterprise with user accounts. What is the MOST likely cause?

- A. The office's DNS server is down, which stops devices from associating with Wi-Fi
- B. The access point hides its SSID, so the laptop cannot see the office network when it tries to join
- C. The user's network credentials or certificate are not accepted by the authentication server
- D. The laptop received an APIPA address because the office DHCP scope has run out of free leases

**Answer:** C

**Explanation:** Enterprise Wi-Fi authenticates each user through an authentication server (802.1X), so rejected credentials or a missing certificate block the connection. An exhausted DHCP scope causes an APIPA address after joining, not a join failure. A hidden SSID would not appear in the list at all. DNS is used after connecting, not to associate with an access point.

### Question 7 of 10

A Windows 11 computer fails to start normally after a new antivirus program was installed, but it starts in Safe Mode. What does this result MOST likely indicate, and what is the next step?

- A. The RAM is too small because Safe Mode uses less memory than normal mode; add another memory module now
- B. The hard drive is failing because Safe Mode only reads from undamaged sectors; replace the drive immediately
- C. A driver or service loaded only at normal startup is at fault; remove the new antivirus from Safe Mode
- D. The Windows license was revoked because Safe Mode skips activation checks; reactivate Windows from Settings

**Answer:** C

**Explanation:** Safe Mode loads only essential drivers and services, so a successful Safe Mode boot after a new install points to that software; removing it from Safe Mode is the logical next step. Safe Mode does not avoid bad disk sectors. Activation status does not stop Windows from booting. Memory size is not the issue when the problem began with a software install.

### Question 8 of 10

After a new graphics driver was installed, a Windows 11 computer shows flickering and screen artifacts. The previous driver worked well. What is the QUICKEST way to restore the previous driver?

- A. Use Roll Back Driver on the display adapter's Driver tab in Device Manager
- B. Disable the display adapter in Device Manager and restart the computer
- C. Reset the computer with the Reset this PC option and keep the user's files
- D. Run Disk Cleanup to remove temporary files left behind by the driver installer

**Answer:** A

**Explanation:** Roll Back Driver reinstates the previously installed driver version, which is the fastest fix for a bad driver update. Resetting the PC reinstalls Windows and is far more disruptive. Disk Cleanup does not change driver versions. Disabling the adapter falls back to a basic display driver and loses functionality rather than restoring the working driver.

### Question 9 of 10

Which built-in Windows 11 component provides real-time protection against viruses and other malware?

- A. Windows Defender Firewall
- B. BitLocker Drive Encryption
- C. Microsoft Defender Antivirus
- D. User Account Control prompts

**Answer:** C

**Explanation:** Microsoft Defender Antivirus, managed from the Windows Security app, scans files and processes in real time for malware. Windows Defender Firewall filters network traffic but does not detect malicious files. BitLocker encrypts drives to protect data at rest. User Account Control asks for consent before elevation but does not identify malware.

### Question 10 of 10

A help desk wants to reduce repeated calls about how to connect to the guest Wi-Fi. Which tool BEST addresses this?

- A. A network packet capture that records every guest connection attempt at the lobby
- B. A remote desktop session opened for each guest who has trouble joining the Wi-Fi
- C. A hardware asset inventory listing every access point serial number in the building
- D. A self-service knowledge base article with step-by-step instructions and screenshots

**Answer:** D

**Explanation:** A searchable knowledge base article lets users solve common issues themselves and reduces ticket volume. Remote sessions for every guest add workload rather than reducing it. Packet captures are diagnostic tools, not user guidance. An asset inventory tracks equipment and does not help users connect.

Ready for a timed run? Take the free 15-question 100-140 mini exam: https://devopscodelab.com/app/exams/cisco-100-140/mini/

DevOpsCode Lab is not affiliated with Cisco. 100-140 and related names are trademarks of their owners. We write every question ourselves; these are not real exam questions.
