# Cisco CCNA 200-301 v1.1 practice exams

> 5 timed 200-301 practice tests with 291 questions and a 75% pass mark. See your score in IP Connectivity and Network Fundamentals and every other domain.

Page: https://devopscodelab.com/exams/cisco-200-301/

291 questions in 5 timed practice tests. Each test has about 60 questions and a 120-minute limit. The pass mark is 75%. Results are split across the 6 exam domains.

## Exam at a glance

| Setting | Value |
| --- | --- |
| Practice tests | 5 |
| Questions in total | 291 |
| Questions per test | About 60 |
| Time limit per test | 120 minutes |
| Pass mark | 75% |
| Question types | Single answer and multiple answer (33 multiple-answer questions) |
| Level | Associate |
| Category | Networking |

These are the settings of our practice tests. Check the official Cisco exam page for the current format before you book.

## Domains and weights

| Domain | Weight | Questions in our bank |
| --- | --- | --- |
| Network Fundamentals | 20% | 58 |
| Network Access | 20% | 58 |
| IP Connectivity | 25% | 72 |
| IP Services | 10% | 29 |
| Security Fundamentals | 15% | 44 |
| Automation and Programmability | 10% | 30 |

## Price and access

- 200-301 practice exams: $12.99 for 12 months of access.
- Free mini exam: 15 questions with explanations (free account): https://devopscodelab.com/app/exams/cisco-200-301/mini/
- All-Access subscription includes every exam: https://devopscodelab.com/pricing/
- 10 free questions with answers: https://devopscodelab.com/exams/cisco-200-301/free-practice-questions/

## Sample questions

### Question 1 of 3

A data center team is replacing a three-tier design with a topology in which every leaf switch connects to every spine switch and no two leaf switches connect directly. What is the main benefit of this topology for east-west traffic between servers?

- A. Spanning tree is required to block redundant leaf-to-spine links for loop prevention
- B. Any two servers on different leaves are a predictable, equal number of hops apart
- C. Leaf switches can forward traffic to each other without traversing a spine switch
- D. The spine layer only carries north-south traffic toward the WAN and the internet

**Answer:** B

**Explanation:** In a spine-leaf fabric each leaf is exactly one spine away from every other leaf, so server-to-server latency is consistent and bandwidth scales by adding spines. The links are typically routed and used with ECMP rather than blocked by spanning tree. Leaves do not connect to each other, so traffic between leaves always crosses a spine, and the spines carry east-west traffic, not only north-south traffic.

### Question 2 of 3

The show interfaces output on a switch port shows a steadily increasing count of late collisions, while the connected PC reports no collisions at all. What is the MOST likely cause?

- A. A duplex mismatch, with the switch side at half duplex and the PC at full duplex
- B. An EMI source near the cable that corrupts frames and increments CRC counters
- C. A native VLAN mismatch between the switch port and the network adapter on the PC
- D. A speed mismatch, with the switch port at 100 Mbps and the PC at 1000 Mbps

**Answer:** A

**Explanation:** Late collisions on one side only are the classic symptom of a duplex mismatch: the half-duplex side detects collisions while the full-duplex side transmits freely. A true speed mismatch normally prevents the link from coming up at all, electrical noise shows up mainly as CRC and input errors, and a native VLAN mismatch is a trunk problem that does not create collisions on an access port.

### Question 3 of 3

A switch port connects to a lightweight AP in local mode. How should the switch port normally be configured?

- A. As an access port in the AP's management VLAN only
- B. As an EtherChannel member bundled with the controller
- C. As an 802.1Q trunk carrying every WLAN client VLAN
- D. As a routed port with no switchport configured

**Answer:** A

**Explanation:** A local-mode AP tunnels all client traffic to the controller in CAPWAP, so its switch port only needs to be an access port in the VLAN where the AP gets its management address. Trunks are typical for FlexConnect APs that switch client VLANs locally or for controller uplinks, a routed port is unnecessary, and EtherChannel is used between the controller and the switch rather than on AP ports.


## Study plans

### Two weeks

1. Day 1: take practice test 1 in exam mode to get a baseline.
2. Days 2 to 5: domain mode on IP Connectivity and Network Fundamentals, the two most heavily weighted domains.
3. Day 6: practice test 2 in exam mode, then the mistakes quiz.
4. Days 7 to 12: practice tests 3 to 5, one every other day, each followed by its mistakes quiz.
5. Days 13 and 14: final mode. Book the exam when your readiness stays above the pass mark.

### Four weeks

1. Week 1: one practice test in practice mode, reading every explanation. Note your two lowest domains.
2. Week 2: domain mode on those two domains, then a second practice test in exam mode.
3. Week 3: practice tests 3 and 4 in exam mode, with the mistakes and flagged quizzes after each.
4. Week 4: practice test 5 and final mode until your readiness holds above the pass mark.

## Questions about the 200-301 practice exams

**Are these real 200-301 exam questions?**

No. We write every question ourselves and map it to the published 200-301 exam objectives. We do not use leaked or recalled questions.

**Do the time limit and pass mark match the official exam?**

They match the settings of our practice tests. Exam providers change their format from time to time, so check the official exam page before you book.

**Can I try it before I pay?**

Yes. The free mini exam has 15 questions with full explanations and needs no account.

**How long do I keep access?**

A single-exam purchase gives you 12 months of access. All-Access includes this exam for as long as your subscription runs.

**What happens after I finish a test?**

You get a score, a pass or fail against the pass mark, a score per domain and every answer with its explanation.

Last updated November 2026.

DevOpsCode Lab is not affiliated with Cisco. 200-301 and related names are trademarks of their owners. We write every question ourselves; these are not real exam questions.
