# Free CTAL-TA practice questions

> 10 free CTAL-TA practice questions with the correct answer and an explanation.

Page: https://devopscodelab.com/exams/istqb-ctal-ta-v4-0/free-practice-questions/
Practice exams: https://devopscodelab.com/exams/istqb-ctal-ta-v4-0/

### Question 1 of 10

A test analyst writes the following test case: 'Order more than one book so that the order total qualifies for a discount; expected result: the discount is applied.' How should this test case be classified, and what is typically done with it next?

- A. It is a low-level test case; it already defines its precondition and expected result, so it can be executed directly by any tester
- B. It is a test procedure; it should be combined with setup and reset steps and placed into a regression test suite
- C. It is a test condition; it must first be turned into a test charter before any test case can be derived from it
- D. It is a high-level test case; it is later refined into one or more low-level test cases with concrete data and expected values

**Answer:** D

**Explanation:** The case expresses input and expected result only at an abstract level, so it is a high-level (logical) test case, which is typically refined into one or more low-level test cases with concrete values such as specific books, prices and the resulting total. It is not low-level because it lacks concrete data. It already goes beyond a test condition by stating an expected outcome, and a test procedure is a sequence of test cases with setup and teardown steps, not a single abstract case.

### Question 2 of 10

A user story says: 'As a member, I want to book a fitness class so that I secure a place.' The acceptance criterion is 'A member with a valid membership can book a class with free places.' The test analyst is specifying keywords. Which set of keywords BEST follows the syllabus guidance?

- A. Action keyword 'Class booking by member' with no parameters, and verification keyword 'Booking ok' with no parameters
- B. Action keyword 'ClickButton' with parameter element-id, and verification keyword 'CheckLabelText' with parameter text
- C. Action keyword 'Book Class And Verify Confirmation', combining the action and the assertion for maximum reuse
- D. Action keyword 'Book Class' with parameters member and class, and verification keyword 'Verify Booking Confirmed'

**Answer:** D

**Explanation:** Keywords should contain a verb in imperative form plus a noun, reflect the domain vocabulary, be unique and reusable, and be split into action and verification keywords; 'Book Class' and 'Verify Booking Confirmed' do this at the domain layer. 'ClickButton' and 'CheckLabelText' are test-interface-layer keywords, not domain-level ones derived from the story. Noun phrases without verbs violate the naming guidance, and merging action and verification into one keyword reduces reusability.

### Question 3 of 10

A function returns the shortest driving distance between two cities, but no reliable expected values exist for most city pairs. Which metamorphic relation would be MOST useful for generating follow-up test cases?

- A. Doubling the number of cities in the map database should double the distance returned for every pair
- B. Comparing the returned distance with a manually measured map distance for a sample of ten city pairs
- C. Swapping origin and destination on a road network with two-way roads should return the same distance
- D. Repeating the identical query should give the same response time

**Answer:** C

**Explanation:** A metamorphic relation describes how a change in inputs is reflected in the expected outputs; swapping origin and destination on symmetric roads must produce the same distance, so source and follow-up tests can be checked against each other without knowing the true value. Identical repeated inputs do not form a meaningful change, and response time is not the functional property under test. Doubling the number of cities has no defined effect on distances, and manual measurement is a human oracle, not metamorphic testing.

### Question 4 of 10 (choose 2)

Which statements about metamorphic testing are correct according to the CTAL-TA syllabus? (Choose two.)

- A. Covering each metamorphic relation once provides a recognized coverage measure suitable as an exit criterion
- B. It can be applied when a test oracle problem prevents the expected results of individual test cases from being known
- C. When a metamorphic test fails, the source test case is known to be the one that produced the wrong result
- D. It can only be used for functional testing because metamorphic relations describe functional outputs
- E. It can be combined with random testing to generate many source and follow-up test cases for the same relation

**Answer:** B, E

**Explanation:** Metamorphic testing is useful in the presence of a test oracle problem because source and follow-up results are checked against the relation rather than individually, and it can be combined with random testing to generate many inputs, permutations or multipliers. There are no recognized coverage measures, and covering each relation once is insufficient. It also applies to non-functional testing such as load or installability testing, and after a failure debugging must determine which test case failed.

### Question 5 of 10

A metamorphic relation for a search engine states: 'Adding a filter to a query must return a subset of the original results.' A follow-up test with the filter returns a document that was not in the source test's results. What should happen next?

- A. The relation is removed, because a metamorphic relation that fails once is considered invalid for the test item
- B. The test passes, because both executions returned results and the relation only constrains the number of hits
- C. The test fails, and debugging must determine whether the source or the follow-up execution produced the wrong result
- D. The follow-up test is discarded, because follow-up tests are only valid when the source test has a known expected result

**Answer:** C

**Explanation:** Source and follow-up test cases are combined into a procedure with a joint evaluation; if they do not fulfill the relation, the test fails, and debugging must determine which individual test case failed. The relation concerns the set of results, not just counts. Follow-up tests do not require known expected results, which is a key benefit with oracle problems, and a failing test points to a potential defect, not an invalid relation.

### Question 6 of 10

A web application must be tested on 4 browsers, 3 operating systems, 3 screen resolutions and 2 languages. The test manager wants to limit the number of configurations while still revealing failures caused by interactions between any two parameters. Which approach BEST meets this objective?

- A. Base choice coverage using the most common browser, OS, resolution and language as the base
- B. Pairwise coverage generated with a tool, then adjusted to remove infeasible combinations
- C. Random selection of a fixed number of configurations from the 72 possible combinations
- D. Testing all 72 combinations because interaction failures cannot be predicted in advance

**Answer:** B

**Explanation:** Pairwise coverage ensures every pair of parameter values appears in at least one test, targeting failures triggered by two-parameter interactions with far fewer tests; tools generate the set and constraints remove infeasible combinations. Base choice coverage only varies one parameter at a time from the base, so many pairs are never combined. Testing all 72 is exhaustive and contradicts the requirement to limit configurations, and random selection provides no guarantee of pair coverage.

### Question 7 of 10

A product risk analysis for a medical dosage calculator identifies the highest risk as incorrect results caused by wrong operators in limits combining patient weight and age. The specification is precise, the team is experienced in black-box techniques, and the schedule is not tight. Which technique selection is MOST appropriate?

- A. Random testing with an operational profile of typical patient weights and ages
- B. Experience-based testing with a short checklist
- C. Reliable domain coverage on the weight and age partitions
- D. Crowd testing with real patients and nurses

**Answer:** C

**Explanation:** The risk is about domain implementation defects such as wrong operators or constants at multi-variable borders, which data-based techniques like domain testing target; reliable domain coverage detects considerably more domain defects than simplified coverage, which matches the high risk. Experience-based testing suits low risk or tight schedules, crowd testing addresses diverse environments, and random testing lacks systematic border coverage.

### Question 8 of 10

During system testing of a travel booking site, the test analyst finds that every specified booking function works and returns correct prices, but users must navigate through nine screens to change a seat, which defeats the goal of a quick change. Which sub-characteristic of functional suitability is MOST affected?

- A. Functional appropriateness
- B. Functional correctness
- C. Functional completeness
- D. Interaction capability

**Answer:** A

**Explanation:** Functional appropriateness concerns whether the functions facilitate accomplishing the specified tasks and objectives; a seat change requiring nine screens fails that goal. Correctness is satisfied because prices are correct, and completeness is satisfied because all specified functions exist. Interaction capability is a separate product quality characteristic (usability), not a sub-characteristic of functional suitability.

### Question 9 of 10

In the release report, 180 defects were found before release and 20 further defects were reported in the first six months of production. What is the defect removal efficiency (DRE), and what is a known limitation of this metric?

- A. 89%; DRE measures the defects introduced and removed in the same phase relative to all the defects introduced in that phase
- B. 90%; DRE can only be calculated once every production defect has been found, so it cannot be estimated
- C. 90%; DRE does not distinguish between defects caught through prevention and defects caught through detection
- D. 11%; DRE expresses the share of escaped defects and therefore needs to be minimized rather than maximized

**Answer:** C

**Explanation:** DRE is the ratio of defects removed before release to the total, here 180 / 200 = 90%, with the unknown total estimated by counting defects up to a point in time such as six months after release. The syllabus notes that DRE does not distinguish prevention from detection. DRE can be estimated rather than requiring every defect to be known, the same-phase measure is phase containment effectiveness, and 11% is merely the ratio of escaped to pre-release defects (20 / 180), not DRE.

### Question 10 of 10

Reviewers of a mortgage requirements document are asked to read it from the viewpoints of a loan officer, a tester and a compliance auditor, and the tester must draft acceptance tests from it. During drafting, the tester cannot determine the expected result for applicants with exactly 40% debt-to-income ratio. Which conclusion is MOST appropriate?

- A. Ad hoc reviewing has exposed a missing test charter, which must be written before the requirements are reviewed again
- B. Role-based reviewing has failed, because reviewers should never attempt to derive work products from the document
- C. Checklist-based reviewing is needed instead, because perspectives cannot reveal defects in numeric boundaries
- D. Perspective-based reading has exposed an ambiguity or gap in the boundary definition that must be clarified

**Answer:** D

**Explanation:** Perspective-based reading requires reviewers to attempt to generate the work product they would derive, such as draft acceptance tests; being unable to set an expected result at exactly 40% reveals an ambiguity or missing boundary definition in the test basis. The technique is not ad hoc, deriving work products is a strength of PBR rather than a failure, and perspectives can reveal boundary defects.

Ready for a timed run? Take the free 15-question CTAL-TA mini exam: https://devopscodelab.com/app/exams/istqb-ctal-ta-v4-0/mini/

DevOpsCode Lab is not affiliated with ISTQB. CTAL-TA and related names are trademarks of their owners. We write every question ourselves; these are not real exam questions.
