# JNCIS-ENT JN0-352 practice exams

> JN0-352 practice exams: 290 questions in 5 timed tests covering OSPF and BGP. Every answer explained, with a score for each domain.

Page: https://devopscodelab.com/exams/juniper-jn0-352/

290 questions in 5 timed practice tests. Each test has about 61 questions and a 90-minute limit. The pass mark is 70%. Results are split across the 9 exam domains.

## Exam at a glance

| Setting | Value |
| --- | --- |
| Practice tests | 5 |
| Questions in total | 290 |
| Questions per test | About 61 |
| Time limit per test | 90 minutes |
| Pass mark | 70% |
| Question types | Single answer and multiple answer (31 multiple-answer questions) |
| Level | Professional |
| Category | Networking |

These are the settings of our practice tests. Check the official Juniper Networks exam page for the current format before you book.

## Domains and weights

| Domain | Weight | Questions in our bank |
| --- | --- | --- |
| Layer 2 Switching and VLANs | 12% | 35 |
| Spanning Tree | 11% | 32 |
| Layer 2 Security | 12% | 35 |
| Protocol Independent Routing | 12% | 35 |
| OSPF | 13% | 37 |
| IS-IS | 10% | 29 |
| BGP | 13% | 38 |
| Tunnels | 8% | 23 |
| High Availability | 9% | 26 |

## Price and access

- JN0-352 practice exams: $14.99 for 12 months of access.
- Free mini exam: 15 questions with explanations (free account): https://devopscodelab.com/app/exams/juniper-jn0-352/mini/
- All-Access subscription includes every exam: https://devopscodelab.com/pricing/
- 10 free questions with answers: https://devopscodelab.com/exams/juniper-jn0-352/free-practice-questions/

## Sample questions

### Question 1 of 3

An ELS switch has VLAN V40 with l3-interface irb.40 configured and an IP address on irb.40. The only interface in V40 is down, and hosts on other VLANs cannot ping the irb.40 address. What explains this?

- A. IRB addresses only answer pings from hosts in the same VLAN unless a firewall filter permits it
- B. An IRB interface stays down until at least one Layer 2 interface in its VLAN is up
- C. IRB interfaces need the VLAN to also be assigned to a virtual-router instance to become active
- D. irb.40 must use the same unit number as the VLAN ID and the VLAN must be named vlan40

**Answer:** B

**Explanation:** The IRB logical interface is operationally up only when the VLAN it is bound to has at least one active Layer 2 member, so with the only member down the address is not reachable. There is no default filter limiting IRB pings to the same VLAN. No routing instance is required, and while matching the unit number to the VLAN ID is a convention, neither the unit number nor the VLAN name is mandated.

### Question 2 of 3

On an RSTP switch, a unidirectional link failure causes an alternate port to stop receiving BPDUs, and the engineer fears it will start forwarding and create a loop. Which configuration addresses this?

- A. set protocols layer2-control bpdu-block interface ge-0/0/2
- B. set protocols rstp interface ge-0/0/2 no-root-port and edge
- C. set protocols rstp interface ge-0/0/2 edge
- D. set protocols rstp interface ge-0/0/2 bpdu-timeout-action block

**Answer:** D

**Explanation:** Loop protection (bpdu-timeout-action block) keeps a non-designated port in a loop-inconsistent blocking state when BPDUs stop arriving, instead of letting it transition to designated and forward. Root protection reacts to superior BPDUs, not missing ones, and adding edge would make the port forward even faster, and BPDU blocking disables a port that receives BPDUs, which is the wrong reaction for an inter-switch link.

### Question 3 of 3

On an ELS switch, users in VLAN EMPLOYEE must only receive DHCP leases from the server on trunk ge-0/0/47, and rogue DHCP servers on access ports must be blocked. Which configuration enables this protection?

- A. set system services dhcp-local-server group EMPLOYEE interface ge-0/0/47.0
- B. set protocols dhcp-relay group EMPLOYEE interface ge-0/0/47.0
- C. set vlans EMPLOYEE forwarding-options dhcp-security
- D. set vlans EMPLOYEE forwarding-options dhcp-security arp-inspection

**Answer:** C

**Explanation:** Enabling dhcp-security on the VLAN turns on DHCP snooping; on ELS switches trunk ports are trusted by default and access ports untrusted, so server replies arriving on access ports are dropped. DHCP relay forwards client requests to a server in another subnet and gives no snooping protection. The arp-inspection keyword adds DAI on top of snooping but is not the statement that enables snooping by itself, and dhcp-local-server makes the switch a DHCP server.


## Study plans

### Two weeks

1. Day 1: take practice test 1 in exam mode to get a baseline.
2. Days 2 to 5: domain mode on OSPF and BGP, the two most heavily weighted domains.
3. Day 6: practice test 2 in exam mode, then the mistakes quiz.
4. Days 7 to 12: practice tests 3 to 5, one every other day, each followed by its mistakes quiz.
5. Days 13 and 14: final mode. Book the exam when your readiness stays above the pass mark.

### Four weeks

1. Week 1: one practice test in practice mode, reading every explanation. Note your two lowest domains.
2. Week 2: domain mode on those two domains, then a second practice test in exam mode.
3. Week 3: practice tests 3 and 4 in exam mode, with the mistakes and flagged quizzes after each.
4. Week 4: practice test 5 and final mode until your readiness holds above the pass mark.

## Questions about the JN0-352 practice exams

**Are these real JN0-352 exam questions?**

No. We write every question ourselves and map it to the published JN0-352 exam objectives. We do not use leaked or recalled questions.

**Do the time limit and pass mark match the official exam?**

They match the settings of our practice tests. Exam providers change their format from time to time, so check the official exam page before you book.

**Can I try it before I pay?**

Yes. The free mini exam has 15 questions with full explanations and needs no account.

**How long do I keep access?**

A single-exam purchase gives you 12 months of access. All-Access includes this exam for as long as your subscription runs.

**What happens after I finish a test?**

You get a score, a pass or fail against the pass mark, a score per domain and every answer with its explanation.

Last updated November 2026.

DevOpsCode Lab is not affiliated with Juniper Networks. JN0-352 and related names are trademarks of their owners. We write every question ourselves; these are not real exam questions.
