# JN0-650 Enterprise Routing and Switching practice exams

> Prepare for JN0-650 with 290 practice questions across 5 full timed exams, weighted toward BGP and IP Multicast. Every answer is explained.

Page: https://devopscodelab.com/exams/juniper-jn0-650/

290 questions in 5 timed practice tests. Each test has about 61 questions and a 90-minute limit. The pass mark is 70%. Results are split across the 8 exam domains.

## Exam at a glance

| Setting | Value |
| --- | --- |
| Practice tests | 5 |
| Questions in total | 290 |
| Questions per test | About 61 |
| Time limit per test | 90 minutes |
| Pass mark | 70% |
| Question types | Single answer and multiple answer (28 multiple-answer questions) |
| Level | Professional |
| Category | Networking |

These are the settings of our practice tests. Check the official Juniper Networks exam page for the current format before you book.

## Domains and weights

| Domain | Weight | Questions in our bank |
| --- | --- | --- |
| Interior Gateway Protocols (OSPFv2/OSPFv3) | 13% | 38 |
| BGP | 16% | 46 |
| IP Multicast | 14% | 40 |
| Ethernet Switching and Spanning Tree | 13% | 38 |
| Layer 2 Authentication and Access Control | 11% | 32 |
| IP Telephony Features | 7% | 20 |
| Class of Service | 14% | 41 |
| EVPN-VXLAN | 12% | 35 |

## Price and access

- JN0-650 practice exams: $14.99 for 12 months of access.
- Free mini exam: 15 questions with explanations (free account): https://devopscodelab.com/app/exams/juniper-jn0-650/mini/
- All-Access subscription includes every exam: https://devopscodelab.com/pricing/
- 10 free questions with answers: https://devopscodelab.com/exams/juniper-jn0-650/free-practice-questions/

## Sample questions

### Question 1 of 3

An ABR must advertise only 172.20.0.0/16 into the backbone for area 0.0.0.5 and must suppress one more-specific prefix, 172.20.99.0/24, from appearing in the backbone at all. Which configuration meets both requirements?

- A. area 0.0.0.5 area-range 172.20.0.0/16 plus area-range 172.20.99.0/24 restrict on the ABR
- B. area 0.0.0.0 area-range 172.20.0.0/16 plus area-range 172.20.99.0/24 restrict
- C. area 0.0.0.5 area-range 172.20.0.0/16 plus an OSPF import policy rejecting 172.20.99.0/24
- D. area 0.0.0.5 area-range 172.20.0.0/16 exact plus a network-summary-import policy in area 0

**Answer:** A

**Explanation:** The area-range statements belong under the non-backbone area whose routes are summarized, and the summary alone already hides 172.20.99.0/24 inside the /16; the restrict form ensures that prefix is never advertised even if the summary changes. Configuring the range under area 0 summarizes in the wrong direction. OSPF import policy cannot filter internal routes or LSAs. The exact option changes how the summary is matched, and a network-summary-import policy in area 0 governs summaries generated from area 0 routes, not routes from area 5.

### Question 2 of 3 (choose 2)

An enterprise peers with two ISPs from the same router and wants traffic to a cloud provider's prefixes to use both links simultaneously. The prefixes arrive with identical attributes but different neighbor AS numbers. Which configuration is required? (Choose two.)

- A. multipath multiple-as under the BGP groups
- B. multipath under the BGP groups without additional options
- C. An import policy setting the same local-preference on both groups
- D. as-path-prepend on the export policy toward the busier ISP
- E. A forwarding-table export policy with then load-balance per-packet

**Answer:** A, E

**Explanation:** Because the routes come from different neighbor ASs, multipath needs the multiple-as option to treat them as equal-cost, and a forwarding-table export policy with load-balance per-packet is required so the PFE installs both next hops (on current platforms this performs per-flow hashing). Plain multipath only works when the paths share the same neighbor AS. Equal local preference does not create multipath on its own, and prepending influences inbound rather than outbound traffic.

### Question 3 of 3

An enterprise router peers with ISP-A and ISP-B. It must advertise 198.51.100.0/24 to ISP-B only when the default route learned from ISP-A is missing from inet.0. Which Junos mechanism provides this?

- A. A policy condition with if-route-exists 0.0.0.0/0, used via from condition in a reject term toward ISP-B
- B. A higher local-preference for the ISP-A default route, combined with advertise-inactive on the ISP-B group
- C. A generated route for 198.51.100.0/24 contributed by the ISP-A default, exported to ISP-B with an accept term in the policy
- D. An ISP-B export policy with as-path-prepend repeated five times, so ISP-B only uses the route as a backup

**Answer:** A

**Explanation:** A policy condition with if-route-exists tests whether the ISP-A default is present, so the ISP-B export policy can reject the prefix while the default exists and advertise it otherwise. A generated route contributed by the default would appear only while the default exists, the opposite of the requirement. Local preference and advertise-inactive do not tie advertisement to another route's presence. Prepending still advertises the prefix at all times.


## Study plans

### Two weeks

1. Day 1: take practice test 1 in exam mode to get a baseline.
2. Days 2 to 5: domain mode on BGP and IP Multicast, the two most heavily weighted domains.
3. Day 6: practice test 2 in exam mode, then the mistakes quiz.
4. Days 7 to 12: practice tests 3 to 5, one every other day, each followed by its mistakes quiz.
5. Days 13 and 14: final mode. Book the exam when your readiness stays above the pass mark.

### Four weeks

1. Week 1: one practice test in practice mode, reading every explanation. Note your two lowest domains.
2. Week 2: domain mode on those two domains, then a second practice test in exam mode.
3. Week 3: practice tests 3 and 4 in exam mode, with the mistakes and flagged quizzes after each.
4. Week 4: practice test 5 and final mode until your readiness holds above the pass mark.

## Questions about the JN0-650 practice exams

**Are these real JN0-650 exam questions?**

No. We write every question ourselves and map it to the published JN0-650 exam objectives. We do not use leaked or recalled questions.

**Do the time limit and pass mark match the official exam?**

They match the settings of our practice tests. Exam providers change their format from time to time, so check the official exam page before you book.

**Can I try it before I pay?**

Yes. The free mini exam has 15 questions with full explanations and needs no account.

**How long do I keep access?**

A single-exam purchase gives you 12 months of access. All-Access includes this exam for as long as your subscription runs.

**What happens after I finish a test?**

You get a score, a pass or fail against the pass mark, a score per domain and every answer with its explanation.

Last updated November 2026.

DevOpsCode Lab is not affiliated with Juniper Networks. JN0-650 and related names are trademarks of their owners. We write every question ourselves; these are not real exam questions.
