# Free JN0-650 practice questions

> 10 free JN0-650 practice questions with the correct answer and an explanation.

Page: https://devopscodelab.com/exams/juniper-jn0-650/free-practice-questions/
Practice exams: https://devopscodelab.com/exams/juniper-jn0-650/

### Question 1 of 10

An ABR must advertise only 172.20.0.0/16 into the backbone for area 0.0.0.5 and must suppress one more-specific prefix, 172.20.99.0/24, from appearing in the backbone at all. Which configuration meets both requirements?

- A. area 0.0.0.5 area-range 172.20.0.0/16 plus area-range 172.20.99.0/24 restrict on the ABR
- B. area 0.0.0.0 area-range 172.20.0.0/16 plus area-range 172.20.99.0/24 restrict
- C. area 0.0.0.5 area-range 172.20.0.0/16 plus an OSPF import policy rejecting 172.20.99.0/24
- D. area 0.0.0.5 area-range 172.20.0.0/16 exact plus a network-summary-import policy in area 0

**Answer:** A

**Explanation:** The area-range statements belong under the non-backbone area whose routes are summarized, and the summary alone already hides 172.20.99.0/24 inside the /16; the restrict form ensures that prefix is never advertised even if the summary changes. Configuring the range under area 0 summarizes in the wrong direction. OSPF import policy cannot filter internal routes or LSAs. The exact option changes how the summary is matched, and a network-summary-import policy in area 0 governs summaries generated from area 0 routes, not routes from area 5.

### Question 2 of 10 (choose 2)

An enterprise peers with two ISPs from the same router and wants traffic to a cloud provider's prefixes to use both links simultaneously. The prefixes arrive with identical attributes but different neighbor AS numbers. Which configuration is required? (Choose two.)

- A. multipath multiple-as under the BGP groups
- B. multipath under the BGP groups without additional options
- C. An import policy setting the same local-preference on both groups
- D. as-path-prepend on the export policy toward the busier ISP
- E. A forwarding-table export policy with then load-balance per-packet

**Answer:** A, E

**Explanation:** Because the routes come from different neighbor ASs, multipath needs the multiple-as option to treat them as equal-cost, and a forwarding-table export policy with load-balance per-packet is required so the PFE installs both next hops (on current platforms this performs per-flow hashing). Plain multipath only works when the paths share the same neighbor AS. Equal local preference does not create multipath on its own, and prepending influences inbound rather than outbound traffic.

### Question 3 of 10

An enterprise router peers with ISP-A and ISP-B. It must advertise 198.51.100.0/24 to ISP-B only when the default route learned from ISP-A is missing from inet.0. Which Junos mechanism provides this?

- A. A policy condition with if-route-exists 0.0.0.0/0, used via from condition in a reject term toward ISP-B
- B. A higher local-preference for the ISP-A default route, combined with advertise-inactive on the ISP-B group
- C. A generated route for 198.51.100.0/24 contributed by the ISP-A default, exported to ISP-B with an accept term in the policy
- D. An ISP-B export policy with as-path-prepend repeated five times, so ISP-B only uses the route as a backup

**Answer:** A

**Explanation:** A policy condition with if-route-exists tests whether the ISP-A default is present, so the ISP-B export policy can reject the prefix while the default exists and advertise it otherwise. A generated route contributed by the default would appear only while the default exists, the opposite of the requirement. Local preference and advertise-inactive do not tie advertisement to another route's presence. Prepending still advertises the prefix at all times.

### Question 4 of 10

Two PIM routers on a transit LAN both forward the same (S,G) stream onto the LAN. Which PIM mechanism resolves the duplicate forwarding?

- A. The Assert election chooses a single forwarder
- B. The RP sends a Register-Stop to the second router
- C. The BSR tells one router to prune its interface
- D. The DR election stops the lower-priority router

**Answer:** A

**Explanation:** When a router sees the same traffic it is forwarding arrive on its outgoing interface, PIM Assert messages elect one forwarder based on route preference and metric toward the source. DR election determines which router registers sources and sends joins for hosts but does not stop duplicate transit forwarding. BSR distributes RP information and Register-Stop is sent to a first-hop DR.

### Question 5 of 10

A multicast packet from source 10.5.5.5 arrives on ge-0/0/1, but the unicast route to 10.5.5.5 points out ge-0/0/3. What does the router do with the packet?

- A. Forwards it, because the outgoing interface list is non-empty
- B. Drops it, because it fails the reverse path forwarding check
- C. Sends a PIM register for it to the RP for the matching group
- D. Forwards it only to receivers connected on interface ge-0/0/3

**Answer:** B

**Explanation:** The RPF check requires that multicast arrive on the interface the router would use to reach the source, so a packet on any other interface is dropped to prevent loops. Forwarding is not decided by the outgoing interface list alone. Sending traffic out the RPF interface would be backward. Registers are sent only by a first-hop DR for traffic from directly connected sources.

### Question 6 of 10

Customer sites connected through a provider Q-in-Q service need their spanning-tree BPDUs to pass transparently through the provider EX switches. Which feature should the provider configure on the customer-facing ports?

- A. BPDU protection on the customer-facing edge ports of the provider
- B. Root protection on the customer-facing ports of the provider switch
- C. Layer 2 protocol tunneling with mac-rewrite for the stp protocol
- D. MSTP with the customer VLANs mapped to an extra MSTI instance

**Answer:** C

**Explanation:** L2PT rewrites the destination MAC of customer protocol frames such as STP BPDUs to a multicast address the provider does not process, then restores it at the egress port, so BPDUs pass transparently. BPDU protection disables a port that receives BPDUs. Mapping customer VLANs into a provider MSTI would make the provider participate in the customer's spanning tree. Root protection blocks superior BPDUs rather than tunneling them.

### Question 7 of 10

Printers that have no 802.1X supplicant must be authenticated against RADIUS using their MAC address on ports that also serve 802.1X laptops. Which configuration accomplishes this?

- A. Add each printer to the 802.1X guest-vlan on those ports
- B. Configure mac-radius restrict under the dot1x interface
- C. Enable mac-radius under the dot1x authenticator interface
- D. Enable captive-portal on the printer interfaces in the VLAN

**Answer:** C

**Explanation:** mac-radius lets the switch authenticate devices that do not respond to EAPOL by sending their MAC address to RADIUS, while 802.1X still works for capable hosts. The restrict option disables 802.1X on the port and allows only MAC RADIUS, which breaks the laptops. Captive portal needs a user with a browser. The guest VLAN gives unauthenticated access without validating the printers.

### Question 8 of 10

A new IP phone takes several seconds after link-up to learn its voice VLAN. The operator wants the switch to send LLDP-MED advertisements more rapidly right after a phone is detected. Which feature addresses this?

- A. fast PoE on the phone ports
- B. lldp advertisement-interval 5
- C. lldp-med fast-start
- D. lldp hold-multiplier 1

**Answer:** C

**Explanation:** LLDP-MED fast start sends a burst of advertisements immediately when an LLDP-MED device is detected, speeding up voice VLAN learning. Shortening the global advertisement interval affects every port at all times and adds overhead. A lower hold multiplier ages neighbor information faster without sending more frames. Fast PoE restores power quickly after a switch boot and does not change LLDP timing.

### Question 9 of 10 (choose 2)

Which commands help verify that a classifier is assigning packets to the intended forwarding class on ingress? (Choose two.)

- A. show class-of-service classifier name DSCP-IN
- B. show class-of-service scheduler-map
- C. show interfaces queue ge-0/0/0 egress
- D. show firewall log
- E. show class-of-service rewrite-rule

**Answer:** A, C

**Explanation:** Viewing the classifier shows the code-point to forwarding-class mapping, and the egress queue counters reveal which forwarding classes the traffic actually lands in. Rewrite rules show how egress markings are set, not how ingress traffic is classified. The scheduler map shows how queues are serviced. The firewall log lists packets logged by filters and does not show forwarding-class assignment.

### Question 10 of 10

In an all-active multihomed Ethernet segment, which mechanism ensures that only one leaf forwards BUM traffic from the fabric toward the server?

- A. Aliasing based on Type 1 per-EVI routes from both leaves
- B. Split horizon based on the server's LACP actor priority
- C. Designated forwarder election based on Type 4 routes
- D. MAC mobility based on sequence numbers in Type 2 routes

**Answer:** C

**Explanation:** The leaves exchange Type 4 Ethernet segment routes and elect a designated forwarder per VLAN, and only the DF sends BUM traffic to the segment. Aliasing lets remote leaves load-balance known unicast. MAC mobility handles host moves. Split horizon prevents looping traffic received from the same segment and is not based on LACP priority.

Ready for a timed run? Take the free 15-question JN0-650 mini exam: https://devopscodelab.com/app/exams/juniper-jn0-650/mini/

DevOpsCode Lab is not affiliated with Juniper Networks. JN0-650 and related names are trademarks of their owners. We write every question ourselves; these are not real exam questions.
