# LPIC-2 Linux Engineer (201-450 and 202-450) practice exams

> LPIC-2 practice exams: 290 questions in 5 timed tests covering 212: System Security. Every answer explained, with a score for each domain.

Page: https://devopscodelab.com/exams/lpic-2-linux-engineer/

290 questions in 5 timed practice tests. Each test has about 60 questions and a 90-minute limit. The pass mark is 63%. Results are split across the 13 exam domains.

## Exam at a glance

| Setting | Value |
| --- | --- |
| Practice tests | 5 |
| Questions in total | 290 |
| Questions per test | About 60 |
| Time limit per test | 90 minutes |
| Pass mark | 63% |
| Question types | Single answer and multiple answer (26 multiple-answer questions) |
| Level | Associate |
| Category | DevOps & Cloud Native |

These are the settings of our practice tests. Check the official LPI exam page for the current format before you book.

## Domains and weights

| Domain | Weight | Questions in our bank |
| --- | --- | --- |
| 200: Capacity Planning | 6.67% | 19 |
| 201: Linux Kernel | 7.5% | 22 |
| 202: System Startup | 7.5% | 21 |
| 203: Filesystem and Devices | 7.5% | 21 |
| 204: Advanced Storage Device Administration | 6.67% | 19 |
| 205: Networking Configuration | 9.17% | 27 |
| 206: System Maintenance | 5% | 15 |
| 207: Domain Name Server | 6.67% | 19 |
| 208: HTTP Services | 9.17% | 27 |
| 209: File Sharing | 6.67% | 20 |
| 210: Network Client Management | 9.17% | 26 |
| 211: E-Mail Services | 6.67% | 20 |
| 212: System Security | 11.64% | 34 |

## Price and access

- LPIC-2 practice exams: $12.99 for 12 months of access.
- Free mini exam: 15 questions with explanations (free account): https://devopscodelab.com/app/exams/lpic-2-linux-engineer/mini/
- All-Access subscription includes every exam: https://devopscodelab.com/pricing/
- 10 free questions with answers: https://devopscodelab.com/exams/lpic-2-linux-engineer/free-practice-questions/

## Sample questions

### Question 1 of 3

A server with eight CPU cores shows 'load average: 7.92, 8.05, 7.98' in the output of uptime. Which interpretation is MOST accurate?

- A. The CPUs are about 8% utilized, because load average is the percentage of CPU time used over each of the three intervals
- B. The host is badly overloaded, since on Linux any load average above 1.00 means that processes are waiting in the run queue for a free CPU core
- C. On average about eight tasks were runnable or in uninterruptible I/O, which roughly matches the core count, so the host is busy but not badly oversubscribed
- D. Load is rising sharply, because the 15-minute value is lower than the 5-minute value and the three figures are read from right to left, newest last

**Answer:** C

**Explanation:** On Linux the load average counts tasks that are runnable or in uninterruptible sleep, averaged over 1, 5 and 15 minutes, and has to be compared with the number of CPUs. A steady value of about 8 on eight cores means they are fully used without a long queue. The 'above 1.00 is overloaded' rule only applies to a single CPU. Load average is not a CPU percentage, and the three values are stable here, not a sharp trend.

### Question 2 of 3

A security baseline requires that once the system has booted, no further kernel modules can be loaded until the next reboot. Which setting does this?

- A. Set kernel.tainted = 1 in a file under /etc/sysctl.d/, which tells the kernel to reject new module insertions
- B. Delete /lib/modules/$(uname -r)/modules.dep, so that the kernel refuses every later insmod request
- C. Add 'blacklist *' to /etc/modprobe.d/lockdown.conf, which blocks every module that is not yet loaded
- D. Set kernel.modules_disabled = 1 late in boot, after all required modules are loaded

**Answer:** D

**Explanation:** kernel.modules_disabled is a one-way switch: once it is set to 1, the kernel refuses all module loading and unloading, and the value cannot go back to 0 until reboot, so it must be set after needed modules are loaded. kernel.tainted reports taint flags and does not control loading. blacklist takes module names, not wildcards, and only affects alias-based autoloading. Without modules.dep modprobe fails, but insmod with a file path still works.

### Question 3 of 3

A server drops to a 'grub rescue>' prompt after a disk reorganization. /boot/grub is on the second GPT partition of the first disk. Which commands boot it to the normal GRUB menu?

- A. root (hd0,1), kernel /boot/grub/normal.mod, boot, then rerun grub-install from the prompt
- B. set prefix=(hd0,gpt2)/boot/grub, set root=(hd0,gpt2), insmod normal, normal
- C. set root=/dev/sda2, configfile /boot/grub/grub.cfg, insmod normal, boot
- D. set prefix=(hd0,1)/boot/grub, set root=(hd0,1), insmod linux, boot

**Answer:** B

**Explanation:** At the rescue prompt GRUB has to be told where its modules are (prefix) and which partition to use (root). Loading the normal module and running 'normal' then reads grub.cfg and shows the menu. GRUB 2 numbers partitions from 1, so (hd0,1) is the first partition, and linux/boot without a loaded kernel does nothing. root (hd0,1) and kernel are GRUB Legacy syntax. GRUB device names are not Linux paths such as /dev/sda2, and the minimal rescue shell lacks configfile until normal is loaded.


## Study plans

### Two weeks

1. Day 1: take practice test 1 in exam mode to get a baseline.
2. Days 2 to 5: domain mode on 212: System Security and 205: Networking Configuration, the two most heavily weighted domains.
3. Day 6: practice test 2 in exam mode, then the mistakes quiz.
4. Days 7 to 12: practice tests 3 to 5, one every other day, each followed by its mistakes quiz.
5. Days 13 and 14: final mode. Book the exam when your readiness stays above the pass mark.

### Four weeks

1. Week 1: one practice test in practice mode, reading every explanation. Note your two lowest domains.
2. Week 2: domain mode on those two domains, then a second practice test in exam mode.
3. Week 3: practice tests 3 and 4 in exam mode, with the mistakes and flagged quizzes after each.
4. Week 4: practice test 5 and final mode until your readiness holds above the pass mark.

## Questions about the LPIC-2 practice exams

**Are these real LPIC-2 exam questions?**

No. We write every question ourselves and map it to the published LPIC-2 exam objectives. We do not use leaked or recalled questions.

**Do the time limit and pass mark match the official exam?**

They match the settings of our practice tests. Exam providers change their format from time to time, so check the official exam page before you book.

**Can I try it before I pay?**

Yes. The free mini exam has 15 questions with full explanations and needs no account.

**How long do I keep access?**

A single-exam purchase gives you 12 months of access. All-Access includes this exam for as long as your subscription runs.

**What happens after I finish a test?**

You get a score, a pass or fail against the pass mark, a score per domain and every answer with its explanation.

Last updated November 2026.

DevOpsCode Lab is not affiliated with LPI. LPIC-2 and related names are trademarks of their owners. We write every question ourselves; these are not real exam questions.
