# Free NS0-165 practice questions

> 10 free NS0-165 practice questions with the correct answer and an explanation.

Page: https://devopscodelab.com/exams/netapp-ns0-165/free-practice-questions/
Practice exams: https://devopscodelab.com/exams/netapp-ns0-165/

### Question 1 of 10

A database team uses only iSCSI and FC, and wants every host path to every LUN to be active and optimized so that a controller failure does not require any path state changes. Which platform should be recommended?

- A. An ASA system, which uses symmetric active-active multipathing for SAN
- B. A FAS system using RAID-TEC aggregates with ALUA reporting disabled on igroups
- C. An ONTAP Select cluster with the LUNs placed on a FlexGroup volume across nodes
- D. An AFF A-Series system configured with Selective LUN Map on both HA nodes

**Answer:** A

**Explanation:** ASA systems are block-optimized and present all paths as active-optimized through symmetric active-active multipathing. On unified AFF and FAS systems, ALUA marks partner paths as non-optimized, and Selective LUN Map only limits which nodes report paths. Disabling ALUA is not a supported way to make paths symmetric, and FlexGroup volumes do not host LUNs in this way.

### Question 2 of 10

In a four-node ONTAP cluster, what is the purpose of epsilon?

- A. It reserves a portion of NVRAM on each node so that writes survive a power outage during a takeover
- B. It gives one node an extra fractional vote so that quorum can be decided when the cluster splits into two equal halves
- C. It identifies the node that owns the SVM root volumes and the replicated cluster configuration database
- D. It marks the node that runs the cluster management LIF and the System Manager web service

**Answer:** B

**Explanation:** Epsilon is a tie-breaking weighted vote held by one node so that, if an even-numbered cluster partitions evenly, one side can still hold quorum. NVRAM mirroring protects in-flight writes but has nothing to do with epsilon. The cluster management LIF can run on any node, and the replicated database is held by all healthy nodes rather than a single epsilon owner.

### Question 3 of 10

A four-node cluster loses both nodes of one HA pair at the same moment. Epsilon is held by a node in the surviving HA pair. What happens to the cluster?

- A. The surviving nodes take over the failed pair's aggregates through storage failover across HA pairs
- B. The two surviving nodes keep quorum because epsilon breaks the tie, and they keep serving their own data
- C. The whole cluster loses quorum and stops serving data until at least three of the four nodes are back online
- D. The surviving nodes form a new two-node cluster automatically and enable cluster HA on themselves

**Answer:** B

**Explanation:** With two of four nodes healthy, epsilon gives the surviving side the extra weight needed to keep quorum, so its nodes continue serving their own data. Without epsilon on that side, quorum would be lost. Storage failover works only within an HA pair, so the failed pair's aggregates stay unavailable, and ONTAP does not automatically reform a new cluster.

### Question 4 of 10

A FabricPool aggregate is attached to an object store. The administrator wants both cold user data blocks and cold Snapshot blocks in volume archive1 to move to the cloud tier after the cooling period. Which tiering policy should be set?

- A. all
- B. snapshot-only
- C. none
- D. auto

**Answer:** D

**Explanation:** The auto policy tiers both cold Snapshot blocks and cold active file system blocks once they reach the cooling period. Snapshot-only, the default, tiers only blocks that are no longer referenced by the active file system. The all policy moves data to the cloud tier immediately without waiting for it to cool, and none keeps everything on the performance tier.

### Question 5 of 10

A service provider hosts two tenants on one ONTAP cluster. Both tenants use the same private 10.10.0.0/16 address range and must be kept fully separate at the routing level. What should the administrator configure?

- A. Two subnets in the Default IPspace that both use the 10.10.0.0/16 range with different gateways
- B. One VLAN per tenant on the same ports, with both tenant SVMs left in the Default IPspace
- C. A separate IPspace for each tenant, with that tenant's SVM, broadcast domains, and routes inside it
- D. Two broadcast domains in the Default IPspace, one per tenant, each with its own failover group

**Answer:** C

**Explanation:** IPspaces provide separate routing tables, so overlapping address ranges can exist on the same cluster for different tenants. Broadcast domains and VLANs separate layer 2 traffic, but SVMs in the same IPspace share one routing domain, so duplicate addresses would conflict. Two subnet objects with the same range in one IPspace are not allowed for the same reason.

### Question 6 of 10

A LUN on node1 of a four-node cluster will be moved to an aggregate on node3, which is in a different HA pair. Selective LUN Map is at its default settings. What should the administrator do BEFORE starting the move so that the host does not lose optimized paths?

- A. Remove node1 and its partner from the reporting nodes so that the host is forced to rediscover all paths
- B. Disable ALUA on the igroup so the host treats every path in the cluster as active and optimized
- C. Add node3 and its partner as reporting nodes with lun mapping add-reporting-nodes, then rescan paths on the host
- D. Create a new portset containing only the LIFs on node3 and bind it to the igroup after the move completes

**Answer:** C

**Explanation:** With Selective LUN Map, only the owning node and its HA partner report paths, so the destination HA pair must be added as reporting nodes and the host must discover those paths before the move. Removing the current reporting nodes first would cut all existing paths. Binding a portset after the move is too late and only restricts paths, and ALUA should stay enabled so the host knows which paths are optimized.

### Question 7 of 10

Volume app is junctioned at /app in SVM svm1, and its export policy allows client 10.1.1.20 read-write access. The client still gets access denied when mounting svm1:/app. The SVM root volume uses the default export policy. What should the administrator fix?

- A. Disable NFSv3 on the SVM and enable NFSv4.1 so that the client mounts through a pseudo file system
- B. Change the junction path of volume app to / so that the client mounts it without traversing the root volume
- C. Add a rule to the default policy used by the SVM root volume that gives the client at least read access
- D. Set the volume app security style to mixed so that both UNIX and NTFS clients can traverse the junction

**Answer:** C

**Explanation:** An NFS client must be able to traverse every volume in the path, so the SVM root volume's export policy needs a rule that grants the client at least read access; the default policy has no rules out of the box. The junction path of the SVM root is reserved and cannot be reused for another volume. Security style changes and protocol version changes do not bypass export policy checks on the parent volume.

### Question 8 of 10

A company needs to keep 90 daily Snapshot copies of volume finance on a backup cluster, while the source volume keeps only 7 daily copies. Which SnapMirror configuration meets this requirement?

- A. A FlexClone of the source volume on the backup cluster that is refreshed daily by a Snapshot policy
- B. A load-sharing mirror schedule that runs daily and keeps 90 copies of the volume on the backup cluster
- C. A mirror relationship using the MirrorAllSnapshots policy with the destination Snapshot policy set to 90 copies
- D. A vault relationship using the XDPDefault policy with a rule for the daily SnapMirror label and a retention count of 90

**Answer:** D

**Explanation:** Vault relationships transfer Snapshot copies by SnapMirror label and keep them according to the destination policy's retention, so the backup can keep far more copies than the source. A MirrorAllSnapshots relationship keeps the same Snapshot copies as the source, and Snapshot policies do not run on DP destinations. Load-sharing mirrors and FlexClones are not designed for long-term backup retention across clusters.

### Question 9 of 10

Two ONTAP clusters will replicate volumes with SnapMirror for the first time. Which network objects must exist on each node before a cluster peer relationship can be created?

- A. Intercluster LIFs that can reach the intercluster LIFs on the other cluster
- B. Data LIFs with the data-nfs service policy on the source and destination SVMs
- C. Cluster LIFs on the cluster interconnect ports with an MTU of 9000 on both clusters
- D. Node management LIFs placed in a dedicated SnapMirror broadcast domain on both clusters

**Answer:** A

**Explanation:** Cluster peering and SnapMirror traffic use intercluster LIFs, which must be able to communicate between the two clusters. Cluster LIFs carry only intra-cluster traffic on the cluster interconnect. Node management and data LIFs are not used for peer replication traffic unless an intercluster service policy is applied, which the default data and management roles do not include.

### Question 10 of 10

An administrator wants Snapshot copies of volume hr to be impossible to delete until their retention period ends, even by a cluster administrator, as protection against ransomware. Which feature meets this requirement?

- A. A Snapshot policy with a larger count, so that copies are kept longer before rotation
- B. Tamperproof Snapshot copy locking, with a retention period on the Snapshot copies
- C. Multi-admin verification on the volume snapshot delete command for all administrators
- D. A SnapMirror vault relationship to a second cluster with a 30-day retention rule

**Answer:** B

**Explanation:** Snapshot copy locking uses the SnapLock compliance clock to make Snapshot copies undeletable until their retention time expires. A larger policy count still allows manual deletion. Multi-admin verification adds approvals but a group of administrators can still approve a deletion, and a vault keeps copies on another cluster without locking the copies on the source volume.

Ready for a timed run? Take the free 15-question NS0-165 mini exam: https://devopscodelab.com/app/exams/netapp-ns0-165/mini/

DevOpsCode Lab is not affiliated with NetApp. NS0-165 and related names are trademarks of their owners. We write every question ourselves; these are not real exam questions.
