# 3V0-25.25 Advanced VMware Cloud Foundation 9 Networking practice exams

> 5 timed 3V0-25.25 practice tests with 290 questions and a 70% pass mark. See your score in NSX Architecture and NSX Federation and every other domain.

Page: https://devopscodelab.com/exams/vmware-3v0-25-25/

290 questions in 5 timed practice tests. Each test has about 60 questions and a 135-minute limit. The pass mark is 70%. Results are split across the 6 exam domains.

## Exam at a glance

| Setting | Value |
| --- | --- |
| Practice tests | 5 |
| Questions in total | 290 |
| Questions per test | About 60 |
| Time limit per test | 135 minutes |
| Pass mark | 70% |
| Question types | Single answer and multiple answer (26 multiple-answer questions) |
| Level | Professional |
| Category | Networking |

These are the settings of our practice tests. Check the official VMware exam page for the current format before you book.

## Domains and weights

| Domain | Weight | Questions in our bank |
| --- | --- | --- |
| NSX Architecture, Connectivity and Multisite Design | 23% | 67 |
| NSX Federation, Edge Clusters and Gateway Deployment | 20% | 58 |
| Segments, VPCs, Projects and Tenancy | 18% | 52 |
| Stateful Services and Advanced Integrations | 12% | 35 |
| NSX Operations and Monitoring | 7% | 20 |
| Troubleshooting, ECMP, HA and Packet Walk | 20% | 58 |

## Price and access

- 3V0-25.25 practice exams: $14.99 for 12 months of access.
- Free mini exam: 15 questions with explanations (free account): https://devopscodelab.com/app/exams/vmware-3v0-25-25/mini/
- All-Access subscription includes every exam: https://devopscodelab.com/pricing/
- 10 free questions with answers: https://devopscodelab.com/exams/vmware-3v0-25-25/free-practice-questions/

## Sample questions

### Question 1 of 3

A service provider is designing VCF 9.0 VPC connectivity for a tenant. Workloads in private VPC subnets must reach the internet through source NAT, and the tenant also needs gateway firewall rules on north-south traffic. Which Transit Gateway connectivity design meets these requirements?

- A. Distributed connectivity using a distributed VLAN connection, so that each ESX host routes VPC traffic directly to the physical VLAN gateway
- B. Distributed connectivity with public VPC subnets only, relying on the physical firewall upstream of the VLAN to translate the private address ranges
- C. Centralized connectivity without an Edge cluster, because the Transit Gateway always implements NAT and firewalling in the host distributed router
- D. Centralized connectivity through a gateway connection to a Tier-0 gateway hosted on an NSX Edge cluster, with default outbound NAT enabled

**Answer:** D

**Explanation:** NAT and gateway firewalling are centralized stateful services that run on an NSX Edge service router, so centralized Transit Gateway connectivity through a Tier-0 on an Edge cluster is required, with default outbound NAT providing SNAT for private subnets. Distributed connectivity lets traffic leave the hosts directly on a VLAN without Edges, which gives up these Edge-based stateful services. Moving NAT to an upstream physical firewall drops the NSX gateway firewall requirement. Centralized connectivity cannot exist without an Edge cluster, because the distributed router does not perform stateful NAT.

### Question 2 of 3

A VI workload domain cluster runs both tenant VMs and the NSX Edge VMs. Hosts have two 25 GbE uplinks. The architect wants Edge north-south traffic and host overlay traffic to share the uplinks with a predictable, deterministic path for each Edge BGP peering. Which design is recommended?

- A. Attach the Edge VM interfaces to VDS trunk port groups and pin each uplink VLAN segment with named teaming policies
- B. Configure LACP on the host uplinks and run each Edge BGP peering over the LAG so that the physical switch hashes each session
- C. Connect the Edge VM data interfaces directly to the host physical NICs with DirectPath I/O, bypassing the VDS for all Edge traffic
- D. Connect the Edge VM data interfaces to overlay segments, so that Edge uplink traffic is encapsulated and spread by the host TEPs

**Answer:** A

**Explanation:** The validated design connects Edge VM interfaces to VDS trunk port groups, and inside the Edge uses named teaming policies so that each uplink VLAN segment and BGP session follows one physical path. Edge uplinks are VLAN-based and are not placed on overlay segments. BGP peering of Edge VMs over a host LAG is not recommended, because the hashing makes the path to each peer unpredictable. DirectPath I/O removes the ability to share the NICs with host traffic and is not the recommended Edge VM design.

### Question 3 of 3

A Tier-0 gateway in active-active mode has two Edges, en01 and en02. Each Edge has one uplink to ToR-A and one to ToR-B. ToR-A fails, and en01 also loses its uplink to ToR-B. Which Tier-0 feature lets en01 keep forwarding the flows that the host DRs still send to it?

- A. Standby relocation, which moves the en01 service router to a spare Edge node that still has working uplinks
- B. Inter-SR routing, which builds iBGP between the Tier-0 SRs so en01 can reach the physical network via en02
- C. Route summarization on the Tier-0, which aggregates the routes from both ToR switches into a single prefix
- D. Graceful restart helper mode, which keeps the routes from ToR-A in the forwarding table of en01 until ToR-A returns

**Answer:** B

**Explanation:** Inter-SR routing builds iBGP sessions between the Tier-0 service routers over an internal overlay segment, so an SR that has lost its uplinks can forward traffic to a peer SR that still has external routes. Graceful restart only preserves routes during a control plane restart, not after a link failure. Standby relocation applies to standby service routers of active-standby gateways. Summarization does not provide a new path.


## Study plans

### Two weeks

1. Day 1: take practice test 1 in exam mode to get a baseline.
2. Days 2 to 5: domain mode on NSX Architecture, Connectivity and Multisite Design and NSX Federation, Edge Clusters and Gateway Deployment, the two most heavily weighted domains.
3. Day 6: practice test 2 in exam mode, then the mistakes quiz.
4. Days 7 to 12: practice tests 3 to 5, one every other day, each followed by its mistakes quiz.
5. Days 13 and 14: final mode. Book the exam when your readiness stays above the pass mark.

### Four weeks

1. Week 1: one practice test in practice mode, reading every explanation. Note your two lowest domains.
2. Week 2: domain mode on those two domains, then a second practice test in exam mode.
3. Week 3: practice tests 3 and 4 in exam mode, with the mistakes and flagged quizzes after each.
4. Week 4: practice test 5 and final mode until your readiness holds above the pass mark.

## Questions about the 3V0-25.25 practice exams

**Are these real 3V0-25.25 exam questions?**

No. We write every question ourselves and map it to the published 3V0-25.25 exam objectives. We do not use leaked or recalled questions.

**Do the time limit and pass mark match the official exam?**

They match the settings of our practice tests. Exam providers change their format from time to time, so check the official exam page before you book.

**Can I try it before I pay?**

Yes. The free mini exam has 15 questions with full explanations and needs no account.

**How long do I keep access?**

A single-exam purchase gives you 12 months of access. All-Access includes this exam for as long as your subscription runs.

**What happens after I finish a test?**

You get a score, a pass or fail against the pass mark, a score per domain and every answer with its explanation.

Last updated November 2026.

DevOpsCode Lab is not affiliated with VMware. 3V0-25.25 and related names are trademarks of their owners. We write every question ourselves; these are not real exam questions.
