220-1201
Free 220-1201 practice questions
10 questions from our 220-1201 practice tests, each with the correct answer and a written explanation. Read them with the answers shown, or switch to quiz mode and answer first.
Question 1 of 10, Mobile Devices
A company enrolls employee-owned phones. Leadership wants work email and files kept separate from personal apps, with copy and paste blocked from work to personal apps, but no control of the whole device. Which approach fits BEST?
- AA work profile with MAM app protection policies Correct answer
- BDisabling the personal app store across all phones
- CFull device management with a corporate factory reset
- DA shared device mode used by every employee daily
Answer and explanation: A work profile or container with MAM app protection keeps corporate data in managed apps and blocks copy and paste to personal apps without managing the whole phone. Full device management and factory resets go beyond what personal devices should have. Disabling the personal app store intrudes on personal use, and shared device mode is for kiosk or shift devices, not personal phones.
Question 2 of 10, Networking
A small medical office runs its own VPN gateway, and remote staff report that the VPN connects but they cannot reach the internal file server at 192.168.1.10. Their home routers also use 192.168.1.0/24. What is the MOST likely cause?
- AThe file server needs a public IP address to accept VPN clients
- BThe home routers block outbound traffic to private IP addresses
- CThe VPN tunnel is using WPA3 encryption instead of AES on the link
- DOverlapping subnets send the server traffic to the home LAN Correct answer
Answer and explanation: When the home LAN and office LAN use the same range, the laptop sends 192.168.1.10 traffic to its local network instead of through the tunnel; renumbering the office to a less common range fixes it. WPA3 is a Wi-Fi security protocol, not a VPN cipher. The server does not need a public address because VPN clients reach it privately, and home routers do not normally block outbound private-destination traffic.
Question 3 of 10, Networking
A small office wants its network printer to always receive the same IPv4 address while still being managed centrally from the DHCP server. What should the technician configure?
- AA DHCP exclusion range that contains the printer's address
- BA shorter DHCP lease time for the entire office scope
- CA DHCP reservation tied to the printer's MAC address Correct answer
- DA static IP typed directly into the printer's control panel
Answer and explanation: A reservation maps the printer's MAC address to a fixed IP so the DHCP server always hands it the same address while remaining the central point of management. An exclusion only stops the server from handing out those addresses; it does not assign one. A manually typed static address works but is not managed by DHCP, and a shorter lease time increases renewals without guaranteeing the same address.
Question 4 of 10, Hardware
A graphics department prints complex vector illustrations on a shared laser printer and needs output that looks identical on Windows and macOS workstations. Which printer driver language should the technician install?
- AA WSD scan-only device driver
- BA PostScript driver for the printer Correct answer
- CA generic text-only driver
- DA PCL 6 driver from the printer manufacturer
Answer and explanation: PostScript is a device-independent page description language that renders complex graphics consistently across operating systems, which is why design teams prefer it. A generic text-only driver cannot print graphics. PCL is efficient for office documents but can render differently between platforms, and a WSD scan driver handles scanning rather than printing.
Question 5 of 10, Hardware
A law firm's MFP is shared by several departments, and confidential documents have been picked up by the wrong staff from the output tray. Which configuration BEST prevents this without changing printers?
- AA static IP address and a DHCP reservation for the device
- BDefault duplex and grayscale printing on every workstation
- CA separate print queue for each department on the print server
- DSecured print release with badge authentication at the device Correct answer
Answer and explanation: Secured print release holds jobs until the user authenticates at the MFP, often with a badge, so documents print only when the owner is present. A static IP or reservation changes addressing, not who collects pages. Separate queues still print immediately to the same tray, and duplex and grayscale defaults save supplies but do not protect confidentiality.
Question 6 of 10, Hardware
A certificate authority server must generate and store its private signing keys in tamper-resistant hardware that can be shared by several servers over the network. Which device fits BEST?
- AA discrete TPM chip on each server's board
- BAn encrypted USB flash drive in a locked safe
- CA self-encrypting SSD installed in the CA host
- DA network-attached hardware security module Correct answer
Answer and explanation: An HSM is a dedicated, tamper-resistant appliance for generating and protecting cryptographic keys, and network HSMs can serve multiple servers. A TPM is bound to a single machine and is not designed as a shared key service. An encrypted flash drive exposes keys when in use, and a self-encrypting drive protects stored data rather than performing signing operations.
Question 7 of 10, Virtualization and Cloud Computing
A help desk lead asks whether VM snapshots can replace the nightly backup job for a file server VM. What is the BEST response?
- AYes; snapshots are full independent copies stored on separate backup media
- BYes; snapshots automatically replicate to the cloud provider each night
- CNo; snapshots depend on the base disk and are meant for short-term rollback Correct answer
- DNo; snapshots only capture memory contents and not any disk data
Answer and explanation: Snapshots record changes relative to the original virtual disk, so losing the base disk or datastore loses the snapshot too, and long chains hurt performance; they are for short-term rollback, not backup. Snapshots are not independent copies on separate media and do not replicate anywhere by themselves. They capture disk state, optionally with memory, so saying they include no disk data is incorrect.
Question 8 of 10, Hardware and Network Troubleshooting
A VoIP phone connected to a PoE switch port reboots randomly throughout the day, and the computer plugged into the phone's pass-through port drops off the network at the same moments. Other phones on the same switch are stable. What should the technician check FIRST?
- AThe cable to the phone for a faulty conductor Correct answer
- BThe SIP server's codec negotiation settings
- CThe DHCP server's option for the TFTP server
- DThe computer's network adapter driver version
Answer and explanation: A damaged conductor or loose connector in the phone's cable can momentarily interrupt both PoE power and data, which explains the phone rebooting and the PC dropping at the same time, so testing or replacing that cable comes first. Codec settings affect call quality, not power cycles. A wrong DHCP option would stop the phone from provisioning rather than reboot it randomly, and the PC's driver cannot power-cycle the phone.
Question 9 of 10, Hardware and Network Troubleshooting
After a graphics driver update, a monitor connected over DisplayPort shows washed-out colors and text with fuzzy edges. What should the technician check FIRST?
- AThe DisplayPort cable is plugged into the motherboard port
- BThe display resolution is set to the monitor's native value Correct answer
- CThe monitor's power cable is fully seated in the outlet
- DThe color profile is stored on the user's network share
Answer and explanation: Fuzzy text after a driver change often means the resolution reverted to a non-native value, causing scaling blur, so the native resolution should be confirmed first. A loose power cable causes the monitor to turn off rather than blur. Where a color profile file is stored does not cause fuzzy text, and a cable in the motherboard port would usually give no signal on a system with a discrete GPU.
Question 10 of 10, Hardware and Network Troubleshooting. Choose 2.
A corporate phone shows high data usage, a hot battery while idle, and a newly installed profile the user does not recognize. The device is enrolled in MDM. Which actions should the technician take FIRST? (Choose two.)
- AReplace the battery because it is overheating
- BDisconnect the phone from Wi-Fi and cellular data Correct answer
- CRe-enroll the phone in MDM without removing anything
- DIncrease the phone's screen timeout to reduce wakes
- EReview installed apps and profiles and remove the unknown ones Correct answer
Answer and explanation: Isolating the device from networks stops data exfiltration, and reviewing and removing unknown apps and configuration profiles addresses the likely malware; a factory reset may follow if it persists. The battery is warm because of malicious activity rather than failure. Re-enrolling without cleanup leaves the threat in place, and changing the screen timeout does not address malware.