N10-009

Free N10-009 practice questions

10 questions from our N10-009 practice tests, each with the correct answer and a written explanation. Read them with the answers shown, or switch to quiz mode and answer first.

Back to the N10-009 practice exams

Question 1 of 10, Networking Concepts

A developer reports that a web application encrypts session data before handing it to the transport layer and that the receiving host decrypts it before the application processes it. In the OSI model, which layer is traditionally associated with this encryption and data-format translation?

  1. AApplication layer, which provides network services to software
  2. BTransport layer, which segments data and handles reliability
  3. CPresentation layer, which handles encoding and encryption Correct answer
  4. DSession layer, which manages dialogs

Answer and explanation: The presentation layer (Layer 6) is responsible for translation, encoding, compression, and encryption of data so that both ends can interpret it. The session layer manages dialogs and checkpoints, the application layer provides the interface to network services such as HTTP, and the transport layer handles segmentation, ports, and reliability rather than data format.

Question 2 of 10, Networking Concepts

A cloud team wants to filter traffic at the virtual NIC level so that only the application tier can reach the database instances on TCP 5432, with return traffic allowed automatically. Which control should be used?

  1. AA network security group (security group) applied to the instances Correct answer
  2. BA web application firewall placed in front of the public load balancer
  3. CA route table entry that sends database traffic to a null destination
  4. DA stateless subnet network ACL that needs explicit return-traffic rules

Answer and explanation: Network security groups are stateful filters attached to instances or NICs, so allowing inbound 5432 from the app tier automatically permits the replies. Subnet network ACLs are typically stateless and require explicit return rules, a WAF inspects HTTP traffic at the edge rather than internal database flows, and route tables control paths rather than filtering ports.

Question 3 of 10, Network Implementation

An installer is running 48 new Cat 6 cables from office wall jacks to an IDF. What is the recommended way to terminate the cables in the IDF?

  1. APunch them down on a patch panel and use patch cords to the switch Correct answer
  2. BTerminate them on a 66 block and run them to the switch ports
  3. CSplice them onto a fiber distribution panel with fusion splices
  4. DCrimp RJ45 plugs on each cable and plug them straight into the switch

Answer and explanation: Structured cabling terminates solid-core horizontal runs on a patch panel, and flexible patch cords connect the panel to switch ports, which protects the permanent cable and simplifies moves. Plugging horizontal cable directly into switches makes changes risky and strains solid-core wire. Fiber panels do not terminate copper, and 66 blocks are legacy voice termination.

Question 4 of 10, Network Implementation

A site reaches headquarters over an MPLS link using OSPF. An LTE router was added as a backup, and the administrator wants a static route over LTE used ONLY when the OSPF route disappears. How should the static route be configured?

  1. ASet the static route's administrative distance to 1 and point it to the LTE router
  2. BSet the static route's administrative distance to 100 and point it to the LTE router
  3. CGive the static route a longer prefix length than the OSPF route so it acts as a backup
  4. DSet the static route's administrative distance to 120 and point it to the LTE router Correct answer

Answer and explanation: A floating static route uses an administrative distance higher than the primary protocol (OSPF is 110), so 120 keeps it out of the table until the OSPF route is withdrawn. An AD of 1 or 100 is lower than OSPF, so the static route would replace the MPLS path immediately. A longer prefix would always win by longest-prefix match, sending traffic over LTE all the time.

Question 5 of 10, Network Operations

After a malware outbreak among remote workers, a security team requires that all remote user traffic, including internet browsing, pass through the corporate web proxy and IDS. Which VPN setting should be enforced, and what is the trade-off?

  1. AFull tunnel; more bandwidth is consumed at the corporate internet edge Correct answer
  2. BSplit tunnel; internal resources become unreachable for remote users
  3. CFull tunnel; users can no longer reach internal applications through it
  4. DSplit tunnel; all browsing is inspected but latency to SaaS increases

Answer and explanation: A full tunnel routes all traffic through corporate controls, at the cost of extra load on the corporate internet connection and possibly more latency. Split tunneling sends browsing directly to the internet, bypassing the proxy, so it fails the requirement, and it does not make internal resources unreachable. A full tunnel still provides access to internal applications.

Question 6 of 10, Network Operations

A financial trading platform and a 5G fronthaul network need clock synchronization accurate to sub-microsecond levels, using hardware timestamping on switches. Which protocol BEST meets this requirement?

  1. ANetwork Time Security over public pools
  2. BPrecision Time Protocol (IEEE 1588) Correct answer
  3. CSNTP clients polling every five seconds
  4. DNTP with stratum 1 servers on the LAN

Answer and explanation: PTP (IEEE 1588) uses hardware timestamping and boundary or transparent clocks to achieve sub-microsecond accuracy. NTP, even with local stratum 1 servers, typically achieves millisecond to sub-millisecond accuracy. NTS adds authentication to NTP but does not improve precision, and public pools add variable latency. SNTP is a simplified NTP and is less accurate, regardless of polling interval.

Question 7 of 10, Network Security

A manufacturing plant's SCADA network must exchange production data with an ERP server on the corporate network. The security team wants to minimize the paths an attacker in the corporate network could use to reach programmable logic controllers. Which design BEST meets this requirement?

  1. AConnect the PLCs to the corporate Wi-Fi with WPA3-Enterprise for authentication
  2. BAllow the ERP server to reach the PLCs directly through a site-to-site IPsec tunnel
  3. CPlace the SCADA hosts on a separate VLAN of the corporate core switch with an SVI
  4. DPut a historian in an industrial DMZ so both sides talk only to it through firewalls Correct answer

Answer and explanation: An industrial DMZ with a historian or data broker means the corporate side and the OT side each talk only to an intermediary through firewalls, with no direct corporate-to-PLC path. A separate VLAN with an SVI on the corporate core still routes between zones unless strictly filtered. A direct tunnel from the ERP server to PLCs creates exactly the path the team wants to avoid. Moving PLCs onto corporate Wi-Fi increases their exposure despite strong authentication.

Question 8 of 10, Network Security

A company's public website is hit by a flood of large DNS responses that it never requested, coming from thousands of legitimate DNS servers worldwide. Which statement BEST explains why this attack is so effective?

  1. ASmall queries that spoof the victim's IP make open resolvers send much larger replies Correct answer
  2. BAttackers flood the website with TCP SYN packets that carry DNS queries in their payload
  3. CAttackers poison the ISP resolver cache so every visitor resolves the site to a slow mirror
  4. DAttackers compromise the website's authoritative servers and change its A records to a sinkhole

Answer and explanation: In a DNS amplification (reflection) attack, small queries with the victim's spoofed source IP are sent to open resolvers, which return much larger responses to the victim, multiplying the attacker's bandwidth. Changing authoritative records is a hijacking attack, not a volumetric flood. SYN packets do not carry DNS queries that resolvers answer. Cache poisoning misdirects users but does not flood the victim with unrequested responses.

Question 9 of 10, Network Troubleshooting

A router has these routes: 'O 10.20.0.0/16 via 172.16.1.2' and 'S 10.20.30.0/24 via 172.16.2.2'. Traffic to 10.20.30.15 is failing because 172.16.2.2 is down. Why is the router not using the OSPF route?

  1. AThe static /24 is a longer prefix match, so it is preferred Correct answer
  2. BThe OSPF route has a lower administrative distance than static
  3. CThe router load-balances between the two routes equally
  4. DOSPF routes are never used when any static route exists

Answer and explanation: Routers choose the most specific (longest prefix) match first, so the /24 static route is used for 10.20.30.15 even though its next hop is down, unless the static route is withdrawn (for example by interface or tracking). Static routes do not universally disable OSPF; they only win when prefix lengths are equal, through lower administrative distance. Administrative distance is compared only for identical prefixes. Different prefixes are not load-balanced.

Question 10 of 10, Network Troubleshooting

Users connected to one access switch experience slow performance only when a specific backup server runs. That server is connected to the same switch at 10 Gbps, while the switch's uplink is 1 Gbps and the server sends backups to a NAS in the data center. Interface counters show output drops on the uplink. What is the MOST accurate description of the problem?

  1. AA broadcast storm triggered by the backup server's 10 Gbps NIC
  2. BAddress pool exhaustion on the access VLAN during backup windows
  3. CA duplex mismatch between the backup server and the access switch
  4. DA bottleneck at the 1 Gbps uplink saturated by the backup flow Correct answer

Answer and explanation: Traffic from a 10 Gbps server funnels into a 1 Gbps uplink, saturating it and causing output drops that slow every user on the switch, a classic bottleneck. A broadcast storm would raise broadcast counters regardless of backups. A duplex mismatch would cause errors on the server port, not output drops on the uplink. DHCP pool exhaustion does not slow existing users.