NNSA
Free NNSA practice questions
10 questions from our NNSA practice tests, each with the correct answer and a written explanation. Read them with the answers shown, or switch to quiz mode and answer first.
Question 1 of 10, Object Configuration Creation and Application
A branch firewall has two internet links: fiber and LTE. Administrators want the SD-WAN configuration to treat the LTE link as a metered backup that is used only when the fiber path fails. Which object should be configured to describe the LTE link characteristics and group it for policy use?
- AA SaaS Quality Profile that monitors the LTE link toward the internet applications it carries
- BAn SD-WAN Interface Profile that assigns a link type, link tag and bandwidth values to the LTE interface Correct answer
- CAn Error Correction Profile that enables packet duplication across the LTE and fiber links for critical apps
- DA Path Quality Profile that defines latency, jitter and packet loss thresholds for the LTE link
Answer and explanation: The SD-WAN Interface Profile describes the physical link: its link type, link tag, upload and download bandwidth and probing behavior, and the link tag is what Traffic Distribution profiles reference to choose primary and backup paths. Path Quality profiles set health thresholds, Error Correction profiles add FEC or duplication, and SaaS Quality profiles monitor SaaS reachability; none of them characterize or group the link itself.
Question 2 of 10, Object Configuration Creation and Application
A company subscribes to a threat-intelligence feed published as a plain-text list of malicious IPv4 addresses on an HTTPS web server, updated every hour. The analyst must block traffic to those addresses without editing policy each time the feed changes. What should be configured?
- AA Domain List external dynamic list that polls the feed hourly and is applied in an Anti-Spyware profile
- BA custom URL category of type URL List containing the addresses and attached to a URL Filtering profile
- CAn IP List external dynamic list that polls the feed hourly and is used as a destination in a deny rule Correct answer
- DA static address group populated with the current addresses and refreshed by a scheduled configuration push
Answer and explanation: An IP List EDL is fetched on its own schedule and can be referenced as a source or destination address in Security policy, so feed changes take effect without commits. A Domain List EDL expects domain names and is used for DNS signature enforcement, a static address group requires configuration changes and pushes for every update, and a URL category is matched against URLs rather than raw destination IP traffic.
Question 3 of 10, Object Configuration Creation and Application
An analyst configures an Anti-Spyware profile with DNS sinkholing for malicious domains. Internal clients resolve names through an on-premises DNS server located behind the firewall. How should the analyst identify the infected endpoints?
- ASearch the Traffic logs for sessions from internal hosts toward the sinkhole IP address Correct answer
- BSearch the System logs for sinkhole events, which record the original client address
- CSearch the Threat logs for the DNS query and read the source IP recorded in that entry
- DSearch the URL Filtering logs for the malicious domain under the command-and-control category
Answer and explanation: Because the internal DNS server forwards the query, the Threat log for the DNS lookup shows the DNS server, not the client. The infected host is revealed when it later tries to connect to the sinkhole address, which appears in the Traffic logs. System logs do not record client sinkhole sessions, and URL Filtering logs only show HTTP/HTTPS requests, not the DNS lookup made through the resolver.
Question 4 of 10, Policy Creation and Application
Internal users at 10.1.1.0/24 in the trust zone must reach an internal web server 192.168.50.10 in the DMZ by its public address 198.51.100.10, which is destination-NATed for internet users on the untrust interface. Users get no response, although inbound access from the internet works. Which configuration fixes this U-turn scenario?
- AA NAT rule from trust to untrust for 198.51.100.10 that translates the destination and also translates the source to the firewall's DMZ interface Correct answer
- BA NAT rule from trust to DMZ for 198.51.100.10 that translates only the destination, together with a trust to DMZ Security rule using the private address
- CA NAT rule from untrust to untrust for 198.51.100.10 that translates the destination for any source zone, with a bidirectional static mapping
- DA Security rule from trust to untrust for 198.51.100.10 with no NAT, because the server reply will be routed back through the DMZ interface
Answer and explanation: For U-turn NAT the NAT rule's destination zone is the zone the public address routes to (untrust), and translating the source to the DMZ interface makes the server reply through the firewall instead of directly to the client. A trust-to-DMZ NAT rule never matches because route lookup puts the public IP in untrust, an untrust-to-untrust rule does not match trust-sourced traffic, and without destination NAT the traffic never reaches the server.
Question 5 of 10, Policy Creation and Application. Choose 2.
A company wants to block access to web sites in the high-risk category for all users, but allow those sites for the security research team without decrypting their traffic. Which two Security policy configurations achieve this? (Choose two.)
- AAn application override that classifies high-risk sites as a custom web application
- BA rule below it for all users that blocks high-risk with URL category match criteria Correct answer
- CAn allow rule for the research group with high-risk as a URL category match criterion Correct answer
- DA decryption rule that decrypts high-risk sites for the research group so they can browse
- EA Security rule for all users that sets the high-risk category to override in the service
Answer and explanation: Security rules can use URL categories as match criteria; an allow rule for the research group placed above a block rule for everyone else gives the required exception, and categorization uses SNI without needing decryption. Override is a URL Filtering action rather than a service setting, decrypting the research team is not required, and application override cannot classify web sites by category.
Question 6 of 10, Policy Creation and Application
A privacy policy forbids decrypting employees' banking and health-care traffic while all other outbound HTTPS is decrypted. Which approach meets this with the least ongoing maintenance?
- AA decrypt rule with an exception list of individual bank and hospital domain names maintained by the security team
- BA no-decrypt rule above the decrypt rule that matches the financial-services and health-and-medicine URL categories Correct answer
- CA Security policy rule that blocks financial-services and health-and-medicine so that they never need decryption
- DAn application override rule for TCP 443 toward banking and medical sites so that those sessions bypass inspection
Answer and explanation: Decryption policy can match predefined URL categories, and a no-decrypt rule placed above the general decrypt rule exempts those categories as the vendor database updates. Maintaining domain lists by hand creates ongoing work and gaps, blocking the categories violates the business need to allow them, and application override disables App-ID and threat inspection instead of addressing decryption.
Question 7 of 10, Management and Operations
The security operations team wants to receive an email and a ServiceNow ticket whenever Strata Cloud Manager raises a critical incident for any firewall. What should be configured?
- AA Log Forwarding profile with email and HTTP server profiles attached to every Security rule
- BA System log alarm threshold on each managed firewall that sends SNMP traps to the ServiceNow MID server
- CA scheduled custom report in Activity Insights that emails the incident list to the team daily
- DA notification rule for incidents that matches critical severity and targets email and ServiceNow Correct answer
Answer and explanation: Incident notification rules in Strata Cloud Manager filter incidents by attributes such as severity and send them to integrations such as email, ServiceNow or webhooks in near real time. Log Forwarding profiles forward traffic and threat logs, not AIOps incidents, SNMP alarms on each firewall are decentralized and do not create tickets, and a daily report is not real-time notification.
Question 8 of 10, Management and Operations
An analyst investigating a suspected compromise of host 10.20.5.14 wants every threat detection for that host over the past 24 hours. What is the most efficient approach in Strata Cloud Manager?
- AOpen Log Viewer, select the Threat log type, filter on the host's address and set the time range to 24 hours Correct answer
- BOpen Activity Insights, select the Applications tab and sort the list by the session count of the host
- COpen Command Center and export the threat widget for all hosts, then search the export for the address
- DOpen Policy Optimizer, select the rule that permits the host's traffic and review the threat detections listed under that rule
Answer and explanation: Log Viewer queries Strata Logging Service by log type with filters on fields such as source or destination address and a chosen time window, returning exactly the detections needed. Exporting a dashboard widget is indirect and summarized, Policy Optimizer does not list threat detections per host, and the Applications view in Activity Insights shows usage rather than threat events.
Question 9 of 10, Management and Operations
A team wants junior analysts to investigate logs and incidents in Strata Cloud Manager without being able to change or push configuration. What is the best approach?
- AAssign the junior analysts a read-only or analyst role scoped to the tenant Correct answer
- BGive them a superuser role and rely on change review before every configuration push
- CCreate a separate folder for them so that their configuration changes cannot be pushed
- DGive them local firewall admin accounts with read-only rights on each managed device
Answer and explanation: Role-based access in the Palo Alto Networks hub and Strata Cloud Manager lets the team grant view-only or analyst permissions, so juniors can work with logs and incidents without configuration rights. Superuser with manual review still allows changes, local device accounts bypass the central tools, and folders organize devices rather than restricting user permissions.
Question 10 of 10, Troubleshooting
After a configuration push from Strata Cloud Manager, one firewall reports a failed push while the others succeed. The error states that a referenced object could not be resolved. What is the most likely cause?
- AThe device sits in a folder that is configured not to inherit Security policy rules from its parent
- BA rule pushed to that device references a variable or object that has no value in that device's scope Correct answer
- CThe firewall's Strata Logging Service license expired, which blocks configuration pushes to it
- DThe firewall's dataplane CPU was too high during the push, so the commit was deferred
Answer and explanation: Push validation fails when configuration references an object or variable that is not defined for that device's folder or device scope, while other devices with values succeed. A logging license does not block configuration pushes, high dataplane load does not cause unresolved-reference errors, and folders always inherit rules from their parent folders.