NNSP

Free NNSP practice questions

10 questions from our NNSP practice tests, each with the correct answer and a written explanation. Read them with the answers shown, or switch to quiz mode and answer first.

Back to the NNSP practice exams

Question 1 of 10, Network Security Fundamentals

After SSL Forward Proxy is enabled, a mobile banking app used by employees stops working while browsers on the same devices work normally. The app validates the server against a hardcoded public key. What is the recommended way to restore the app while keeping decryption for other traffic?

  1. AReplace the forward untrust certificate with one signed by a public CA
  2. BDistribute the forward trust CA certificate to the mobile devices again
  3. CAdd the app's destination to a decryption exclusion or no-decrypt rule Correct answer
  4. DEnable the decryption profile option that blocks unsupported cipher suites

Answer and explanation: Apps that use certificate pinning reject any certificate except the one they expect, so even a trusted forward trust CA breaks them; excluding the destination from decryption is the documented fix. Redistributing the CA does not satisfy a pinned app, blocking unsupported ciphers adds restrictions instead of solving the problem, and the forward untrust certificate must never be publicly trusted because it warns users about bad server certificates.

Question 2 of 10, Network Security Fundamentals

A newly built NGFW has only the two predefined default rules. Users in the trust zone can reach each other, but traffic from trust to dmz is dropped, and no Traffic log entries appear for these drops. What explains the missing log entries?

  1. AThe intrazone-default rule is evaluated first and suppresses logging for sessions that originate in the trust zone
  2. BThe predefined interzone-default rule denies traffic without logging unless its logging setting is overridden Correct answer
  3. CInterzone denials are recorded only in the Threat log, so the Traffic log stays empty for that particular zone pair
  4. DDenied sessions are written to the Traffic log only when a Zone Protection profile is attached to the ingress zone

Answer and explanation: Both predefined rules have logging disabled by default; administrators must override the interzone-default rule to enable log at session end if they want visibility into denied traffic. The intrazone rule only matches traffic within one zone and has no effect on trust-to-dmz flows, Zone Protection profiles do not control Traffic logging, and policy denies are Traffic log events rather than Threat log events.

Question 3 of 10, NGFW and SASE Solution Functionality

A company runs dozens of AWS VPCs and wants centralized VM-Series inspection of inbound, outbound and east-west traffic that scales automatically and preserves original source IP addresses. Which architecture meets these requirements?

  1. ACN-Series firewalls deployed in every spoke VPC as pods on a small dedicated EKS cluster per VPC
  2. BA single large VM-Series instance in each spoke VPC with an Elastic IP and static routes to the internet gateway
  3. CA security VPC with VM-Series behind an AWS Gateway Load Balancer, connected to the spokes through Transit Gateway Correct answer
  4. DVM-Series behind a Network Load Balancer that applies source NAT so return traffic comes back to the same firewall

Answer and explanation: Gateway Load Balancer distributes traffic to a scalable VM-Series fleet transparently using GENEVE encapsulation, so source IPs are preserved, and Transit Gateway centralizes routing from the spokes. Source NAT behind a Network Load Balancer hides original addresses, one instance per VPC is neither centralized nor elastic, and CN-Series is meant for Kubernetes workloads rather than VPC routing.

Question 4 of 10, Platform Solutions, Services, and Tools

An e-commerce site is hit by SQL injection attempts that are crafted to evade existing vulnerability signatures. The company has Advanced Threat Prevention. Which configuration adds detection for these previously unknown exploit attempts?

  1. AEnable inline cloud analysis for exploits in the Vulnerability Protection profile on the web server rule Correct answer
  2. BApply a stricter Zone Protection profile with packet-based attack protection on the internet-facing zone
  3. CAdd a custom spyware signature that matches the SQL keywords seen in recent attacks against the site
  4. DEnable WildFire inline ML in the Antivirus profile on the rule that allows inbound HTTPS to the web servers

Answer and explanation: Advanced Threat Prevention adds inline cloud analysis models to Vulnerability Protection that detect zero-day exploit attempts such as SQL and command injection. A custom signature only matches the patterns already seen, WildFire inline ML analyzes files rather than injection payloads, and Zone Protection handles floods and packet anomalies rather than application-layer exploits.

Question 5 of 10, Platform Solutions, Services, and Tools

A company wants to block only URLs that are both in the newly-registered-domain category and in the high-risk category, while leaving other newly registered domains reachable. Which configuration achieves this?

  1. AA custom URL category of type URL List containing domains that the team copies from the high-risk category weekly
  2. BA URL Filtering profile that sets newly-registered-domain to block and high-risk to continue for all users
  3. CA Category Match custom URL category listing both categories, set to block in the URL Filtering profile Correct answer
  4. DAn external dynamic list of domain type fed by threat intelligence and referenced in the URL Filtering profile

Answer and explanation: A Category Match custom category matches only when a URL belongs to all listed categories, so it can target the intersection of risk and newly registered. Manual URL lists go stale, blocking the whole newly-registered-domain category breaks the stated requirement, and an EDL depends on external feeds rather than the combination of categories.

Question 6 of 10, Platform Solutions, Services, and Tools

Why is automated certificate lifecycle management, as addressed by Palo Alto Networks Next-Generation Trust Security, becoming essential for organizations with many public TLS certificates?

  1. APublic certificate authorities will stop issuing RSA certificates entirely by 2026, so all keys must be regenerated
  2. BCertificates must now be renewed whenever a firewall content update changes the trusted root store on devices
  3. CBrowsers will reject any certificate that is not issued by the organization's own private certificate authority, even for public sites
  4. DMaximum validity of public TLS certificates is being cut in stages toward 47 days, so manual renewal does not scale Correct answer

Answer and explanation: Industry rules adopted by the CA/Browser Forum reduce maximum public TLS certificate validity in stages, reaching 47 days, which makes manual tracking and renewal error-prone and drives the need for automated discovery and renewal. Public CAs continue to issue RSA certificates, browsers trust public CAs rather than only private ones, and content updates do not force renewals.

Question 7 of 10, NGFW and SASE Solution Maintenance and Configuration

An organization already manages its PA-Series firewalls with Panorama and is adding Cloud NGFW for Azure. It wants to keep using its existing Panorama device groups for rule management. What should it do?

  1. AExport the Panorama configuration and import it into Azure Firewall policy for the hub
  2. BDeploy a VM-Series in the same VNet and forward Cloud NGFW logs to it for policy enforcement
  3. CIntegrate the Cloud NGFW resource with Panorama and manage its rules through Panorama policy Correct answer
  4. DRecreate every rule manually as a local rulestack in the Azure portal and disable Panorama

Answer and explanation: Cloud NGFW for Azure supports Panorama integration, so policies can be authored in existing Panorama device groups and applied to the managed service. Rebuilding rules locally duplicates work, a VM-Series does not enforce policy for another firewall, and Azure Firewall is a different product that cannot import PAN-OS configuration.

Question 8 of 10, Infrastructure Management and CDSS

Corporate security requires a set of rules that every branch firewall evaluates before any locally defined rules, and branch administrators must not be able to override them. How should this be implemented in Panorama?

  1. AConfigure the rules as post-rules in each branch device group of the hierarchy
  2. BConfigure the rules as pre-rules in the Shared location or a parent device group Correct answer
  3. CConfigure the rules locally on each firewall and lock them with restrictive admin roles
  4. DConfigure the rules in a template so that they are pushed ahead of local policy

Answer and explanation: Panorama pre-rules are evaluated before local firewall rules and cannot be edited on the firewall, and placing them in Shared or a parent device group applies them across the hierarchy. Post-rules are evaluated after local rules, templates carry network and device settings rather than policy, and locally defined rules can be changed by local administrators.

Question 9 of 10, Infrastructure Management and CDSS

SaaS Security API discovers a spreadsheet containing customer personal data that is shared publicly from the sanctioned cloud storage tenant. Which response can SaaS Security API perform automatically?

  1. ASend the spreadsheet to Advanced WildFire so that a phishing verdict removes the share
  2. BChange the file's sharing to internal only or quarantine the file through the app's API Correct answer
  3. CBlock the cloud storage app for all users with an Advanced URL Filtering policy update pushed from Panorama
  4. DCreate a dynamic address group that isolates the owner's laptop from the network

Answer and explanation: Because it connects to the sanctioned app's API, SaaS Security API can remediate at rest, for example by removing public sharing, notifying the owner or quarantining the file. Blocking the whole app does not fix the exposed file, WildFire analyzes malware rather than exposure, and endpoint isolation does not change sharing permissions in the cloud.

Question 10 of 10, Connectivity and Security

A company has GlobalProtect external gateways in three regions. Users should connect to the nearest responsive gateway, but the headquarters gateway should be preferred when response times are similar. How should this be configured?

  1. AConfigure each region's gateway as an internal gateway and enable internal host detection in the portal's agent config
  2. BConfigure one portal per region and ask users to choose the portal that is closest to their location
  3. CAssign a static gateway to each user group so that users always connect to the gateway of their region
  4. DList all gateways in the portal's agent configuration and give the headquarters gateway the highest priority Correct answer

Answer and explanation: The GlobalProtect app evaluates the external gateways listed in its configuration by priority and response time, so higher-priority gateways are preferred when performance is comparable. Internal gateways are for users on the corporate network, separate portals add operational work, and static assignments ignore response times when users travel.