SISSM
Free SISSM practice questions
10 questions from our SISSM practice tests, each with the correct answer and a written explanation. Read them with the answers shown, or switch to quiz mode and answer first.
Question 1 of 10, Service Mapping Pattern Design
An application pattern has two identification sections: one for version 8 that reads server.xml, and one for version 9 that reads a YAML file. On version 9 hosts the CI is created with empty attributes. Debugging shows that the version 8 section runs first and succeeds because server.xml still exists from an old install. What is the BEST fix?
- AAsk the server teams to delete the leftover server.xml file from every version 9 host before the next scheduled discovery of the service
- BSwap the order of the two sections so version 9 runs first and leave both sections unchanged
- CDelete the version 8 section so that every host is identified by the version 9 section only
- DAdd a precondition or Match step to the version 8 section that checks the version from the running process Correct answer
Answer and explanation: Identification sections are tried in order and the first that succeeds is used, so the version 8 section must verify it really is talking to a version 8 process, for example by checking the executable or version from the command line. Deleting it breaks real version 8 hosts, depending on file cleanup is fragile, and simply swapping the order would let the version 9 section misidentify version 8 hosts unless it also gets a guard.
Question 2 of 10, Service Mapping Pattern Design
In a Service Mapping pattern, which part is responsible for determining what the CI is and populating its attributes, before any outgoing connections are explored?
- AThe pre-processing script attached to the CI class in the CMDB
- BThe entry point type record that the service owner selected for the map
- CThe connection section of the pattern that creates the next hop
- DThe identification section of the pattern Correct answer
Answer and explanation: Identification sections run first and decide whether the process really is the application the pattern describes, then fill in the CI attributes. Connection sections only run after a successful identification and are used to find outbound connections to the next hop. The entry point type only describes how traffic enters a CI, and pre/post-processing scripts adjust payloads rather than identify the application.
Question 3 of 10, Service Mapping Pattern Design
While building a connection section, a developer has a tabular variable listing every back-end server and port that an application server forwards requests to. What should the connection section use to turn each row into an outgoing link on the map?
- AA Match step that stops the pattern unless the table contains exactly one row of values
- BA Set Parameter Value step that stores the first row of the table in a scalar variable
- CA Create Connection step that iterates the table and maps host and port to the entry point attributes Correct answer
- DA Merge Table step that joins the back-end table with the cmdb_ci_appl table and then saves the merged result as the connection list
Answer and explanation: Create Connection is the operation that produces outgoing connections; when given a tabular variable it creates one connection per row, mapping columns to entry point attributes such as host and port. Merge Table only combines tables in memory, storing just the first row would lose the other back ends, and a Match step that terminates on multiple rows would break a valid configuration.
Question 4 of 10, Service Mapping Configuration
Traffic-based discovery adds dozens of connections from an application server to backup and monitoring systems, cluttering the map. What should the administrator do?
- AMark the application server itself as a boundary so no connections from it are discovered
- BDelete the backup and monitoring CIs from the CMDB so that they cannot appear on this or any other application service map again
- CExclude those systems from traffic-based discovery or disable it for that host, then rediscover Correct answer
- DIncrease the rediscovery frequency so that short-lived connections age out of the map faster
Answer and explanation: Limiting traffic-based discovery, for example by excluding infrastructure ports or hosts or disabling it where patterns already cover the connections, removes noise while keeping real application flows. Deleting the CIs damages the CMDB and they would come back, a boundary on the app server would also hide its legitimate database connection, and more frequent discovery does not filter connections.
Question 5 of 10, Service Mapping Configuration
A service map includes an F5 virtual server and its pool members, but discovery shows the virtual server's pool as empty on one night and full the next. The F5 pattern reads configuration via the device API. What is the MOST likely cause to investigate?
- AIntermittent authentication or timeout failures between the MID Server and the device API during some runs Correct answer
- BThe application owners are deleting and recreating the virtual server every night on the device
- CThe pool members are being treated as boundaries on alternate nights by the scheduling logic
- DThe application service's environment field changes from Production to Test and back again between the nightly discovery runs
Answer and explanation: When device data alternates between empty and full, partial failures in collection such as timeouts or authentication errors are the usual cause, visible in discovery messages. The environment field does not change on its own, boundaries are not toggled by schedules, and nightly recreation is implausible.
Question 6 of 10, Discovery Configuration
A company keeps all privileged passwords in a third-party vault and forbids storing them in ServiceNow. How can Service Mapping still use them?
- AGive the MID Server service account local administrator rights and skip credential records
- BExport the vault's passwords into the ServiceNow credentials table once a week through a scheduled import set and transform map
- CRun Service Mapping without credentials and rely on traffic-based discovery for every host
- DConfigure external credential storage so the MID Server retrieves secrets from the vault at run time Correct answer
Answer and explanation: External credential storage integrations let the MID Server fetch credentials from vaults such as CyberArk or HashiCorp Vault when needed, so secrets stay outside the instance. Importing passwords violates the policy, traffic-based discovery still needs host access, and the MID Server's own service account is not a substitute for target credentials on remote hosts.
Question 7 of 10, Discovery Configuration
A Service Mapping project must map services that run on Linux hosts in a segmented network zone. Which configuration makes sure discovery requests for those hosts go through the correct MID Server?
- AConfigure the zone's hosts to push their process list to the instance through the REST API
- BInstall a MID Server on every Linux host in the segmented zone so that each host can run discovery against itself locally
- CAssign the zone's IP range to a MID Server located in that zone that has the Service Mapping capability Correct answer
- DOpen direct SSH access from the ServiceNow instance to the zone's hosts through the firewall
Answer and explanation: MID Server selection uses the IP ranges and capabilities assigned to MID Servers, so a MID Server inside the segment with the right capability and range is what Service Mapping will use. One MID Server per host is unnecessary and costly, the instance never connects directly to hosts, and a push model is not how top-down mapping collects data.
Question 8 of 10, Configuration Management Database
Two discovery sources create the same Tomcat CI, producing duplicates in the CMDB. Which platform capability should be configured so both sources update a single CI?
- AA business rule on the Tomcat table that deletes the older duplicate record after every insert operation from either source
- BA CMDB data certification policy that asks owners to merge the duplicates every quarter
- CA dynamic CI group that combines both Tomcat CIs into one logical CI for the service map
- DIdentification rules for the Tomcat class, applied by the Identification and Reconciliation Engine Correct answer
Answer and explanation: The IRE uses identification rules (identifier entries on the class) to decide whether incoming data matches an existing CI, preventing duplicates from multiple sources. Deleting records with a business rule bypasses the IRE and loses data, certification only reviews data after the fact, and a dynamic CI group groups CIs without making them one record.
Question 9 of 10, Machine Learning
Service candidates produced by machine learning include the corporate DNS and monitoring servers in almost every group. What is the BEST way to improve the candidates?
- AAdd DNS and monitoring hosts to every top-down service map so the groups become consistent
- BConvert each candidate to an application service immediately and remove the shared hosts later
- CIncrease how often horizontal Discovery runs so that the traffic data on those hosts is refreshed
- DExclude widely shared infrastructure such as DNS and monitoring hosts from the candidate analysis Correct answer
Answer and explanation: Hosts that talk to everything act as hubs that pull unrelated CIs into the same cluster, so excluding shared infrastructure produces cleaner candidates. Converting noisy candidates spreads the error into the CMDB, more frequent scans do not change the communication pattern, and adding the hubs to every map makes the problem worse.
Question 10 of 10, Service Mapping Engagement Readiness
An application owner says the order service 'uses the shared Oracle RAC cluster' that also supports 25 other applications. How should the engagement team plan for this shared service?
- AMap the full RAC cluster into all 26 services independently and decide later whether to clean up
- BAgree on how shared components are represented, for example as a boundary or a separate service, before mapping Correct answer
- CExclude the RAC cluster from scope because shared components cannot be mapped by Service Mapping
- DAsk the owner to move the order service to a dedicated database before the mapping project starts
Answer and explanation: Shared services need a deliberate modeling decision up front so maps stay readable and impact analysis is correct, for example stopping at the shared component or representing it as its own service. Mapping it everywhere without a plan creates clutter, shared components can be mapped, and re-architecting the application is outside the engagement.