N10-009 study guide: Network+ exam domains, plan and common mistakes

Written and reviewed by the DevOpsCode Lab Team. Last updated 19 November 2026.

N10-009 is the current CompTIA Network+ exam. It checks that you can design, set up, run and fix a small to mid-size network: addressing and protocols, switching and routing, wireless, network services, monitoring, basic security and a structured approach to troubleshooting. It sits between A+ and Security+ in the usual CompTIA path.

What the exam tests

Questions are practical. You get a symptom (“users on the third floor get 169.254 addresses”), a diagram or a requirement, and you must pick the cause, the device or the setting. Expect to subnet quickly, recognize port numbers on sight, and know which OSI layer a device or problem belongs to. Troubleshooting is the largest domain, so a lot of the exam is about reading clues and ruling options out.

Domains and how much each counts

Domain Weight What to be able to do Questions in our bank
Networking Concepts 23% OSI model, common ports and protocols, IPv4 and IPv6 addressing and subnetting, topologies, cloud and data center concepts, network appliances 102
Network Implementation 20% Switching and VLANs, routing basics, wireless standards and settings, cabling and connectors, physical installation 88
Network Operations 19% Documentation and diagrams, monitoring and logs, DHCP, DNS and NTP, high availability and disaster recovery, remote access methods 84
Network Security 14% Security concepts, common attacks, hardening techniques, access control, segmentation and network security devices 61
Network Troubleshooting 24% The CompTIA troubleshooting method, cable and physical issues, switching and routing faults, wireless problems, performance issues and the tools to diagnose them 106

Troubleshooting and Concepts together are almost half the exam. Network Security is the smallest domain, but it overlaps heavily with Security+, so time spent here pays off twice.

Exam format

Our practice tests use 90 questions in 90 minutes with an 80% pass mark. The real exam has up to 90 questions in 90 minutes and includes performance-based questions, such as configuring a device in a simulation or matching cables to connectors, alongside multiple-choice questions. CompTIA reports results on a 100–900 scale, and the passing score for Network+ is 720. Check the official CompTIA exam page for the current format, price and objectives before you book.

Who should take it

  • Help desk and desktop support staff moving into network or system administration.
  • Junior network technicians who want a vendor-neutral credential for their current work.
  • A+ holders planning a path toward Security+ or a Cisco certification.

CompTIA recommends A+ and some hands-on networking experience, but there is no formal prerequisite. If you have never configured a switch or a home router beyond the defaults, add lab time early.

A 4-week study plan

Week Focus Practice
1 Networking Concepts: OSI layers, ports and protocols, subnetting IPv4, IPv6 address types Practice mode on this domain; subnet ten networks a day; take one full test at the end of the week as a baseline
2 Network Implementation: VLANs and trunks, routing basics, wireless standards, cable types Domain quiz for implementation; review every wrong answer with its explanation
3 Network Operations and Security: DHCP, DNS, monitoring, high availability, hardening and attacks Two domain quizzes; draw the network in each scenario before you answer
4 Troubleshooting and full exams: the seven-step method, tool choice, common fault patterns Two full timed tests, then the mistakes quiz; book the exam when you score 80%+ twice

Topics people often get wrong

  • The troubleshooting order. Identify the problem, establish a theory, test the theory, establish a plan of action, implement the solution or escalate, verify full system functionality, then document. Questions often ask for the next step, and documenting comes last.
  • Subnet sizes. A /26 gives 64 addresses and 62 usable hosts, a /27 gives 30 usable and a /30 gives 2. Subtract two for the network and broadcast addresses in IPv4.
  • Ports that look alike. SNMP uses 161 and 162, Syslog 514, LDAP 389 and LDAPS 636, SMB 445, RDP 3389. DNS uses port 53 over both UDP and TCP.
  • APIPA addresses. A 169.254.x.x address means the client did not get a DHCP lease. Check the DHCP server, scope exhaustion or the path to the server before you blame DNS.
  • Wireless channels. In 2.4 GHz only channels 1, 6 and 11 do not overlap in most regions. Interference and too many access points on one channel are common causes of slow Wi-Fi.
  • Which layer a device works at. Hubs are layer 1, switches layer 2, routers layer 3. A layer 3 switch can route, which is a frequent answer when VLANs need to talk to each other.

How to use the practice tests

Start with the free N10-009 questions to see the style. Then take one full timed test in exam mode for a baseline and look at the score by domain. Spend most of your time in the two weakest domains with domain quizzes, and finish with the mistakes quiz before each new full test. The readiness number tells you when your recent scores hold above the pass mark across all domains.

Frequently asked questions

How hard is Network+? Harder than A+ for most people, mainly because of subnetting and troubleshooting. With some networking work behind you, 4–6 weeks of focused study is common.

Do I need A+ first? No. A+ is recommended, not required. If you already work with networks, you can go straight to Network+.

How long is the certification valid? CompTIA Network+ is valid for three years and can be renewed through CompTIA’s continuing education program.

Are these the real exam questions? No. Every question is written by us for the published exam objectives. We never use leaked or recalled exam content.

DevOpsCode Lab is not affiliated with or endorsed by CompTIA. Exam names are trademarks of their owners. Check the official CompTIA exam page for the current price, format and objectives before you book.