HPE7-A01
Free HPE7-A01 practice questions
10 questions from our HPE7-A01 practice tests, each with the correct answer and a written explanation. Read them with the answers shown, or switch to quiz mode and answer first.
Question 1 of 10, Plan the Solution
An architect's high-level design states that all IoT devices will be placed in one VLAN spanning every building. The customer has thousands of IoT devices and requires that a compromised device cannot reach devices of another type. Which adjustment should the engineer propose for the low-level design?
- AKeep one IoT VLAN but increase the subnet size so every building can share the same DHCP scope
- BUse role-based policies so each IoT device type gets its own role with rules that block peer traffic Correct answer
- CPlace every IoT device in the existing guest VLAN, which already has client isolation enabled on the WLAN
- DCreate one /24 subnet per building and route between them on the core without additional filtering
Answer and explanation: Role-based policy, assigned per device type through ClearPass or the local profiling, enforces micro-segmentation regardless of VLAN, which meets the requirement to block cross-type traffic. A larger subnet increases the broadcast domain, per-building subnets routed without filtering still allow cross-type reachability, and moving IoT into the guest VLAN mixes them with visitors and does not cover wired devices.
Question 2 of 10, Plan the Solution
A retail chain will onboard 400 new AOS-CX switches and APs to HPE Aruba Networking Central using zero-touch provisioning. Which preparation step must be completed before the devices are shipped to stores so that they land in the correct configuration group automatically?
- AAdd the devices to the HPE GreenLake inventory, assign subscriptions, and pre-assign them to the Central group Correct answer
- BUpload the store configuration templates to an internal TFTP server and point each device to it with DHCP option 66
- CStage every device in a lab, apply the store configuration over the console, and save it to the startup configuration
- DCreate a DHCP reservation on each store's router that hands out the Central URL as DHCP option 43 to every device
Answer and explanation: Zero-touch provisioning to Central relies on the devices being in the GreenLake device inventory with a valid subscription and assigned to the Central application and group, so they inherit configuration when they first call home. Lab staging over the console defeats the purpose of ZTP, and option 43 or TFTP/option 66 methods are on-premises provisioning techniques that do not place devices into a Central group.
Question 3 of 10, Configure the Solution
An engineer is configuring an AOS-CX VSX pair as the default gateway for VLAN 20. Both switches must forward traffic for hosts in VLAN 20 at the same time, and hosts must not need to relearn their gateway MAC address when one member fails. Which feature should be configured on the VLAN 20 interface of both members?
- Aactive-gateway with the same virtual IP address and virtual MAC address Correct answer
- Bip helper-address pointing to both members' physical SVI addresses
- CA static ARP entry for the gateway on every host in the subnet
- DVRRP on both members with a higher priority configured on the VSX primary member
Answer and explanation: VSX active-gateway gives both members the same virtual IP and virtual MAC so each can route traffic for the subnet locally (active-active) and failure is transparent to hosts. VRRP elects a single master per group, so only one member forwards as the gateway. An IP helper address relays DHCP and does not provide gateway redundancy, and static ARP entries on hosts are unmanageable and do not give active-active forwarding.
Question 4 of 10, Configure the Solution
An engineer is provisioning AOS-CX switches in an HPE Aruba Networking Central UI group. Most settings are shared, but each switch needs a unique hostname, management IP, and uplink description. The customer wants to keep the group in UI mode rather than converting to a template group. What is the MOST efficient way to handle the per-device values?
- AConfigure shared settings at the group level and override only the unique values at the device level Correct answer
- BConfigure the unique values on each switch through the CLI and let Central import them during sync
- CCreate a separate UI group for each switch so that every device can hold its own full configuration
- DConvert the group to a template group and use variables, then switch it back to a UI group later
Answer and explanation: Central's configuration hierarchy allows group-level settings with device-level overrides, which keeps shared configuration in one place while setting unique values per switch. A group per switch removes the benefit of shared configuration, converting to a template group contradicts the requirement, and local CLI changes on a Central-managed device cause configuration mismatches rather than a clean import.
Question 5 of 10, Configure the Solution
An engineer is configuring a WLAN where printers, which support only WPA2-Personal, and corporate laptops must connect to the same SSID. Each printer must be placed in the 'printer' role and each laptop in the 'employee' role. Laptops should use a unique key per device rather than one shared password. Which feature meets these requirements on AOS-10?
- AOpen authentication with MAC filtering and a role assigned by the AP's local MAC list
- BWPA2-Enterprise with PEAP for laptops and a pre-shared key fallback for the printers
- CMPSK, with each device's key and role assigned through ClearPass or MPSK Local Correct answer
- DWPA3-SAE with a single strong passphrase and a role derived from the DHCP fingerprint
Answer and explanation: Multiple pre-shared key (MPSK) lets each device or group have its own passphrase on one SSID, with the matched key returning a role, and it is compatible with WPA2-Personal clients. A single SAE passphrase is shared and printers lacking WPA3 cannot join, an SSID cannot combine PEAP and PSK for different clients, and open authentication with MAC filtering offers no encryption.
Question 6 of 10, Operate the Solution
An engineer must change the RADIUS server address on 200 AOS-CX switches that are managed in an HPE Aruba Networking Central template group. What is the MOST efficient way to make this ongoing configuration change?
- ACreate a new template group with the new address and move the 200 switches into it one by one
- BUse NetEdit to search for the old address and replace it on each of the switches in individual change sets
- CConnect to each switch over SSH, change the RADIUS server address, and save the configuration locally
- DUpdate the RADIUS server line in the group template, or the variable it references, and let Central push it Correct answer
Answer and explanation: In a template group, configuration is driven by the template and its variables, so updating the template or variable pushes the change to all switches. Manual SSH changes create configuration drift on Central-managed devices, moving devices to a new group is unnecessary churn, and NetEdit is not the management tool for switches already managed by Central templates.
Question 7 of 10, Operate the Solution
A customer wants to proactively detect degraded user experience from the end user's perspective, such as slow DNS resolution or failed authentication to a SaaS application, even when no users are complaining. Which solution should the operations team use?
- ACentral AP statistics for channel utilization and noise floor that are collected every minute
- BClearPass Access Tracker reviews by the help desk at the start of each business day
- CNAE agents on the core switches that monitor CPU and memory of each core member
- DHPE Aruba Networking UXI sensors running scheduled synthetic tests from user locations Correct answer
Answer and explanation: UXI sensors act like users, running synthetic tests against Wi-Fi, DNS, authentication, and applications to detect issues proactively. AP RF statistics do not test application reachability, Access Tracker reviews are reactive and limited to authentication, and NAE agents on core switches monitor switch health rather than end-to-end experience.
Question 8 of 10, Troubleshoot the Solution
ClearPass shows Access-Accept for a wired user, but the AOS-CX switch logs a RADIUS timeout for the same request and applies the critical role. The ClearPass server has two interfaces, and the switch is configured with the data interface address. What is the MOST likely cause?
- AThe user's laptop does not support EAP-TLS, so the switch waits for an EAP response indefinitely
- BThe switch's spanning-tree configuration blocks the uplink port toward the ClearPass server
- CThe switch has the wrong RADIUS shared secret, so ClearPass cannot decrypt the incoming request attributes
- DClearPass replies from its other interface, so the switch discards the response from an unexpected source Correct answer
Answer and explanation: If ClearPass sends the reply from a different interface address than the one the switch targeted, the switch ignores it and times out, even though ClearPass logged an accept; correcting routing on ClearPass fixes it. A wrong shared secret would cause rejects or errors in Access Tracker, an EAP problem would not produce an accept, and a blocked uplink would stop the request from reaching ClearPass.
Question 9 of 10, Troubleshoot the Solution
Users in VLAN 50 on a VSX core report one-way audio on calls to a remote site. Traffic to the remote site goes out through member 1, and return traffic arrives on member 2. A firewall between the core and WAN is stateful. What is the MOST likely issue?
- AA duplex mismatch on the VSX ISL that drops every second voice packet travelling in each direction
- BAn expired certificate on ClearPass that interrupts the phones' 802.1X session mid-call
- CA missing LLDP-MED policy on the phones that causes them to use the data VLAN instead
- DAsymmetric routing through the stateful firewall, which drops return packets it never saw leave Correct answer
Answer and explanation: If outbound and return traffic take different paths through a stateful firewall, the firewall may drop packets for sessions it did not track, causing one-way audio. A duplex mismatch would degrade both directions, a missing LLDP-MED policy affects VLAN assignment rather than call direction, and certificate issues prevent authentication rather than causing one-way media.
Question 10 of 10, Optimize the Solution
A hospital WLAN carries voice, telemetry, and guest traffic. During peak hours, voice quality suffers because guest video consumes airtime. Which optimization BEST prioritizes voice on the WLAN without removing guest access?
- AMove the guest SSID to the 2.4 GHz band only and increase its channel width to 40 MHz
- BDisable WMM on all SSIDs so every client gets equal access to the medium
- CHide the guest SSID so that fewer clients discover it during peak hours
- DUse WMM with DSCP mapping for voice and a role-based bandwidth limit for guests Correct answer
Answer and explanation: WMM with proper DSCP mapping gives voice frames higher access priority, and role-based bandwidth contracts limit guest consumption. Disabling WMM removes prioritization and breaks 802.11n and later rates, 40 MHz on 2.4 GHz causes interference, and hiding the SSID does not reduce consumption by connected guests.