NPANNF

NGFW-Engineer Palo Alto Networks Next-Generation Firewall (NPANNF) practice exams

290 questions in 5 timed practice tests. Each test has about 61 questions and a 90-minute limit. The pass mark is 70%. Results are split across the 3 exam domains.

Exam at a glance

NPANNF practice exam settings
Practice tests 5
Questions in total 290
Questions per test About 61
Time limit per test 90 minutes
Pass mark 70%
Question types Single answer and multiple answer (30 multiple-answer questions)
Level Associate
Category Security

These are the settings of our practice tests. Check the official Palo Alto Networks exam page for the current exam format before you book.

Domains and weights

NPANNF exam domains, weights and question counts
Domain Weight Weight bar Questions in our bank
PAN-OS Networking Configuration 38% 110
PAN-OS Device Setting Configuration 38% 110
Integration and Automation 24% 70

Sample questions

Question 1 of 3

Two PA-Series firewalls are deployed as an active/passive HA pair. The engineer wants the peers to detect a control-plane failure even if the primary HA1 link fails, without triggering an unnecessary failover. What should be configured?

  1. A Link monitoring on the dedicated HA1 interface in a link group
  2. B Path monitoring that pings each peer's management IP address from the dataplane
  3. C An HA2 backup link with HA2 keep-alive set to log only
  4. D An HA1 backup link on a separate interface or the management port (correct answer)
Why: HA1 carries hellos, heartbeats, and configuration synchronization; adding an HA1 backup link means that losing one HA1 path does not make the peers believe each other has failed, which avoids split brain or needless failover. An HA2 backup protects session synchronization, not control-plane heartbeats. Path monitoring tests reachability of external destinations and would cause failover rather than prevent it. Link monitoring on HA1 itself would turn an HA1 failure into a failover trigger, which is the opposite of the goal.

Question 2 of 3

A firewall terminates links in an untrust zone that faces the internet. The security team wants to mitigate SYN floods and port scans aimed at any host behind that interface before security policy lookup. What should be configured?

  1. A A zone protection profile with flood and reconnaissance protection applied to the untrust zone (correct answer)
  2. B An interface management profile on the untrust interface that blocks ping and SSH
  3. C A DoS protection policy with a classified profile protecting each published server address in the zone
  4. D A vulnerability protection profile with all critical signatures set to reset-both
Why: Zone protection profiles are applied to the ingress zone and defend the whole zone against floods (such as SYN floods with SYN cookies) and reconnaissance like port scans. A classified DoS protection policy protects specific critical hosts, which is narrower than the requirement. Vulnerability protection inspects allowed sessions for exploits, after policy, and does not handle floods. A management profile controls management services on the firewall interface itself, not traffic to hosts behind it.

Question 3 of 3

In an active/passive HA pair, an engineer wants the firewall with the better device priority to automatically regain the active role after it recovers from a failure. Which combination of settings is required?

  1. A Set identical priorities on both peers and enable the aggressive HA timer profile on both firewalls
  2. B Enable preemption on the passive firewall only and set the Passive Link State option to auto
  3. C Configure the higher device priority value on the preferred firewall and enable preemption on it alone
  4. D Give the preferred firewall the lower priority value and enable preemption on both peers (correct answer)
Why: In PAN-OS HA, a lower numeric device priority is preferred, and preemption must be enabled on both peers for the preferred firewall to retake the active role after recovery. A higher numeric value is less preferred, and enabling preemption on one peer only is not sufficient. Passive Link State controls whether the passive firewall's links stay up and has nothing to do with role election. Identical priorities leave the election to serial number, and timer profiles only change detection speed.

What your score report looks like

Example attempt, NPANNF practice test 3

82%

Passed
Pass mark 70%

Score by exam domain
DomainWeightYour score%
PAN-OS Networking Configuration 38%
88
PAN-OS Device Setting Configuration 38%
81
Integration and Automation 24%
76

Study next: Integration and Automation. It is below the pass mark and carries 24% of the exam.

Domains and pass mark from our NPANNF practice tests. Scores are an example attempt.

Study plans

Two weeks

  1. Day 1: take practice test 1 in exam mode to get a baseline.
  2. Days 2 to 5: domain mode on PAN-OS Networking Configuration and PAN-OS Device Setting Configuration, the two most heavily weighted domains.
  3. Day 6: practice test 2 in exam mode, then the mistakes quiz.
  4. Days 7 to 12: practice tests 3 to 5, one every other day, each followed by its mistakes quiz.
  5. Days 13 and 14: final mode. Book the exam when your readiness stays above the pass mark.

Four weeks

  1. Week 1: one practice test in practice mode, reading every explanation. Note your two lowest domains.
  2. Week 2: domain mode on those two domains, then a second practice test in exam mode.
  3. Week 3: practice tests 3 and 4 in exam mode, with the mistakes and flagged quizzes after each.
  4. Week 4: practice test 5 and final mode until your readiness holds above the pass mark.

Questions about the NPANNF practice exams

Are these real NPANNF exam questions?
No. We write every question ourselves and map it to the published NPANNF exam objectives. We do not use leaked or recalled questions.
Do the time limit and pass mark match the official exam?
They match the settings of our practice tests. Exam providers change their format from time to time, so check the official exam page before you book.
Can I try it before I pay?
Yes. The free mini exam has 15 questions with full explanations and needs no account.
How long do I keep access?
A single-exam purchase gives you 12 months of access. All-Access includes this exam for as long as your subscription runs.
What happens after I finish a test?
You get a score, a pass or fail against the pass mark, a score per domain and every answer with its explanation.

Last updated November 2026. Written and reviewed by the DevOpsCode Lab team.

DevOpsCode Lab is not affiliated with Palo Alto Networks. NPANNF and related names are trademarks of their owners.

Related exams
Exam Vendor Level Questions Minutes Price
NNSPNETSEC-PRO Network Security Professional Palo Alto Networks Professional 300 90 $14.99
SecOps-ProPalo Alto Networks Security Operations Pro (SecOps-Pro) Palo Alto Networks Professional 300 90 $14.99
NNSANETSEC-ANALYST Network Security Analyst Palo Alto Networks Associate 300 90 $12.99
SSEPalo Alto Networks Security Service Edge (SSE) Engineer Palo Alto Networks Associate 300 90 $12.99
100-160Cisco CCST Cybersecurity 100-160 Cisco Foundational 251 50 $9.99
CCCC Certified in Cybersecurity ISC2 Foundational 376 120 $9.99