NPANNF
Free NPANNF practice questions
10 questions from our NPANNF practice tests, each with the correct answer and a written explanation. Read them with the answers shown, or switch to quiz mode and answer first.
Question 1 of 10, PAN-OS Networking Configuration
Two PA-Series firewalls are deployed as an active/passive HA pair. The engineer wants the peers to detect a control-plane failure even if the primary HA1 link fails, without triggering an unnecessary failover. What should be configured?
- ALink monitoring on the dedicated HA1 interface in a link group
- BPath monitoring that pings each peer's management IP address from the dataplane
- CAn HA2 backup link with HA2 keep-alive set to log only
- DAn HA1 backup link on a separate interface or the management port Correct answer
Answer and explanation: HA1 carries hellos, heartbeats, and configuration synchronization; adding an HA1 backup link means that losing one HA1 path does not make the peers believe each other has failed, which avoids split brain or needless failover. An HA2 backup protects session synchronization, not control-plane heartbeats. Path monitoring tests reachability of external destinations and would cause failover rather than prevent it. Link monitoring on HA1 itself would turn an HA1 failure into a failover trigger, which is the opposite of the goal.
Question 2 of 10, PAN-OS Networking Configuration
A firewall terminates links in an untrust zone that faces the internet. The security team wants to mitigate SYN floods and port scans aimed at any host behind that interface before security policy lookup. What should be configured?
- AA zone protection profile with flood and reconnaissance protection applied to the untrust zone Correct answer
- BAn interface management profile on the untrust interface that blocks ping and SSH
- CA DoS protection policy with a classified profile protecting each published server address in the zone
- DA vulnerability protection profile with all critical signatures set to reset-both
Answer and explanation: Zone protection profiles are applied to the ingress zone and defend the whole zone against floods (such as SYN floods with SYN cookies) and reconnaissance like port scans. A classified DoS protection policy protects specific critical hosts, which is narrower than the requirement. Vulnerability protection inspects allowed sessions for exploits, after policy, and does not handle floods. A management profile controls management services on the firewall interface itself, not traffic to hosts behind it.
Question 3 of 10, PAN-OS Networking Configuration
In an active/passive HA pair, an engineer wants the firewall with the better device priority to automatically regain the active role after it recovers from a failure. Which combination of settings is required?
- ASet identical priorities on both peers and enable the aggressive HA timer profile on both firewalls
- BEnable preemption on the passive firewall only and set the Passive Link State option to auto
- CConfigure the higher device priority value on the preferred firewall and enable preemption on it alone
- DGive the preferred firewall the lower priority value and enable preemption on both peers Correct answer
Answer and explanation: In PAN-OS HA, a lower numeric device priority is preferred, and preemption must be enabled on both peers for the preferred firewall to retake the active role after recovery. A higher numeric value is less preferred, and enabling preemption on one peer only is not sufficient. Passive Link State controls whether the passive firewall's links stay up and has nothing to do with role election. Identical priorities leave the election to serial number, and timer profiles only change detection speed.
Question 4 of 10, PAN-OS Networking Configuration
A firewall has two ISP links. The default route via ISP1 must be withdrawn automatically when two public resolvers behind ISP1 stop answering pings, so the floating default route via ISP2 takes over. What should the engineer configure?
- AHA path monitoring against both resolvers with failure condition all
- BPath monitoring on the ISP1 static route with both destinations and failure condition all Correct answer
- CA PBF rule for all traffic with Monitor enabled and the action set to Fail Over
- DA zone protection profile with ICMP flood protection on the ISP1 zone
Answer and explanation: Static route path monitoring pings the listed destinations and removes the route from the routing table when the failure condition is met, letting a higher-distance floating route via ISP2 become active. HA path monitoring triggers failover between HA peers, which does not apply to a single firewall's route choice. A PBF rule could steer traffic, but using it for all traffic is a more complex substitute for routing failover. Zone protection mitigates floods and does not influence routing.
Question 5 of 10, PAN-OS Device Setting Configuration
The help desk needs administrators who can view logs and reports and run packet captures but cannot change any policy or network configuration. Built-in dynamic roles are too broad. What should the engineer create?
- AA dynamic Device Administrator (read-only) role assigned to the help desk administrator accounts
- BA password profile with a shorter expiration period and a separate authentication sequence
- CAn authentication profile that permits only the help desk group in the allow list field
- DAn admin role profile enabling Monitor features with Policies and Network read-only or disabled Correct answer
Answer and explanation: Admin role profiles provide granular, role-based control over web interface, XML API, CLI, and REST API privileges, so Monitor features can be enabled while Policies and Network are restricted. The read-only dynamic role does not allow actions such as packet captures and cannot be customized. Password profiles control expiration and grace periods, not privileges. An authentication profile allow list controls who can authenticate, not what they can do after login.
Question 6 of 10, PAN-OS Device Setting Configuration
A decryption policy rule must block sessions to sites that present certificates from untrusted issuers and block sessions that use unsupported protocol versions. Where are these controls configured?
- AIn the URL Filtering profile under the certificate validation options
- BIn the certificate profile assigned to the Forward Trust certificate
- CIn the decryption profile attached to the decryption policy rule Correct answer
- DIn the SSL/TLS service profile bound to the decryption policy rule
Answer and explanation: Decryption profiles contain server certificate verification options (such as blocking expired certificates and untrusted issuers) and mode checks (such as blocking unsupported versions or cipher suites), and they are attached to decryption policy rules. Certificate profiles authenticate users or devices by certificate. SSL/TLS service profiles secure firewall services like the web interface. URL Filtering profiles control access by category and do not validate server certificates.
Question 7 of 10, PAN-OS Device Setting Configuration
Administrators must reach the firewall web interface only with TLS 1.2 or later and a certificate signed by the internal CA. Which configuration accomplishes this?
- AAn SSL/TLS service profile with the internal CA-signed certificate and minimum version TLSv1.2 Correct answer
- BA decryption profile with minimum TLS 1.2 attached to a rule for the management IP
- CA certificate profile containing the internal CA, assigned to the management interface in device setup
- DAn interface management profile that allows HTTPS only and disables HTTP and Telnet
Answer and explanation: The SSL/TLS service profile specifies the certificate and the minimum and maximum TLS versions for services such as the management web interface, and it is selected in the management settings. Decryption profiles govern traffic passing through the firewall, not the firewall's own web server. Certificate profiles validate client certificates and do not choose a server certificate. A management profile controls which services are reachable but not the TLS version or certificate.
Question 8 of 10, PAN-OS Device Setting Configuration
An engineer wants the firewall to send DNS, NTP, and software update traffic from a dataplane interface instead of the dedicated management port, because the management network has no internet access. What should be configured?
- AA policy-based forwarding rule that sends management-plane traffic out the dataplane interface
- BA static route on the management interface that points to the dataplane interface gateway
- CService route configuration that selects the dataplane source interface for those services Correct answer
- DAn interface management profile that allows DNS, NTP, and updates on the dataplane interface
Answer and explanation: Service routes define which source interface and address the firewall uses for management-plane services such as DNS, NTP, updates, and syslog. An interface management profile controls inbound management access to an interface, not outbound service traffic. PBF applies to dataplane traffic passing through the firewall, not to traffic the management plane generates. The management interface has its own default gateway setting and cannot route via a dataplane gateway that way.
Question 9 of 10, Integration and Automation
A global company has a corporate-wide rule set that every firewall must enforce first, regional rules for EMEA and APAC, and local rules at each site. How should the Panorama device groups be structured?
- ASeparate template stacks for corporate, regional, and site policy pushed in a defined commit order
- BA device group hierarchy: corporate pre-rules at Shared, regional child groups, then site groups Correct answer
- CThree independent device groups per firewall, one for corporate, one for regional, and one for site rules
- DA single device group with tags on rules so each firewall applies only the rules carrying its own tag
Answer and explanation: Device group hierarchy lets rules and objects defined at Shared or a parent group be inherited by child groups, and pre-rules from higher levels are evaluated before local rules. Template stacks carry network and device settings, not policy. Tags with target settings can scope rules, but this becomes unmanageable at scale and loses the hierarchy. A firewall can belong to only one device group, so three groups per firewall is not possible.
Question 10 of 10, Integration and Automation
An automation account is used only to push address objects through the API. Following least privilege, how should it be configured?
- AA dynamic read-only role combined with a commit lock so the script cannot commit by mistake
- BAn admin role profile allowing only the needed API permissions, with web UI and CLI disabled Correct answer
- CA local account in the default device administrator role restricted by permitted IP addresses
- DA superuser account with a long, randomly generated password stored in a vault
Answer and explanation: Admin role profiles let you enable only the specific XML API or REST API permissions an automation account needs and disable web interface and CLI access, which is least privilege. A superuser account grants full control regardless of password strength. A read-only role cannot create objects. The device administrator role is still broad; permitted IPs restrict where logins come from, not what they can do.