300-420

300-420 Designing Cisco Enterprise Networks practice exams

290 questions in 5 timed practice tests. Each test has about 60 questions and a 90-minute limit. The pass mark is 80%. Results are split across the 5 exam domains.

Exam at a glance

300-420 practice exam settings
Practice tests 5
Questions in total 290
Questions per test About 60
Time limit per test 90 minutes
Pass mark 80%
Question types Single answer and multiple answer (27 multiple-answer questions)
Level Professional
Category Networking

These are the settings of our practice tests. Check the official Cisco exam page for the current exam format before you book.

Domains and weights

300-420 exam domains, weights and question counts
Domain Weight Weight bar Questions in our bank
Advanced Addressing and Routing Solutions 25% 72
Advanced Enterprise Campus Networks 25% 73
WAN for Enterprise Networks 20% 58
Network Services 20% 58
Automation 10% 29

Sample questions

Question 1 of 3

A bank is introducing IPv6 in a large network that also has many legacy IPv4-only applications that will not be updated for several years. Users need access to IPv6 internet services immediately, and operations wants one long-term operational model. Which migration strategy is MOST appropriate?

  1. A Manual 6in4 tunnels from each branch to a central IPv6 gateway while the core stays IPv4-only
  2. B Native dual stack across the campus and WAN, with IPv4 retired gradually as applications are updated (correct answer)
  3. C IPv6-only access with NAT64 and DNS64 at the edge, and the legacy IPv4 servers moved behind NAT64
  4. D ISATAP on every host so IPv6 is tunneled across the IPv4 infrastructure without router changes
Why: Dual stack gives every host both protocols, so legacy IPv4 applications continue working and IPv6 services are reached natively, and the network converges on a single model as IPv4 is retired. NAT64/DNS64 assists IPv6-only clients reaching IPv4 servers but does not suit IPv4-only clients using legacy applications. Manual tunnels from every branch add overhead and are a transition workaround rather than a long-term model. ISATAP is a host-based tunneling technique that is deprecated in most vendors' design guidance and complicates troubleshooting.

Question 2 of 3

An EIGRP design uses summarization at distribution switches toward the core. After a change, the core still sends queries deep into an access block when an access subnet fails. What is the MOST likely design reason?

  1. A The distribution switches use the wide-metrics EIGRP named mode instead of classic mode
  2. B The summary is configured on the access-facing interfaces instead of the core-facing interfaces (correct answer)
  3. C The access switches run EIGRP with the default variance of 1, so only successor routes are installed
  4. D The core routers are configured as EIGRP stub routers with the connected keyword
Why: Queries stop at a router that does not have the specific prefix in its topology table, so the summary must be advertised toward the core on the core-facing interfaces; configuring it the other way leaves the core with specific routes and queries continue. Stub configuration on the core would limit queries toward the core rather than away from it and would break transit. Named mode and wide metrics do not affect query boundaries. Variance controls unequal-cost load sharing and is unrelated to query propagation.

Question 3 of 3

A service provider-style enterprise backbone runs IS-IS with 220 routers. Engineers want to divide the network so that remote regions keep only intra-region topology and default toward the core, while the core keeps a complete view. What is the BEST IS-IS design?

  1. A Make all routers Level 1-2 and rely on route leaking to keep regional databases small
  2. B Make all routers Level 2 only and configure summarization of each region on the core routers toward one another
  3. C Regional routers as Level 1, regional borders as Level 1-2, and a contiguous Level 2 core (correct answer)
  4. D Make regional routers Level 2, the core Level 1, and use the ATT bit for default routing
Why: In IS-IS, Level 1 routers keep only their area's topology and use the ATT bit set by L1/L2 routers to install a default route, while the contiguous Level 2 backbone holds inter-area reachability. Making every router L1/L2 maintains two databases everywhere and defeats the goal of small regional databases. An all-L2 design gives every router the full topology. Reversing the roles breaks the model because Level 2 must form the contiguous backbone and the ATT bit is set on L1/L2 routers for Level 1 routers.

What your score report looks like

Example attempt, 300-420 practice test 3

77%

Not passed
Pass mark 80%

Score by exam domain
DomainWeightYour score%
Advanced Addressing and Routing Solutions 25%
88
Advanced Enterprise Campus Networks 25%
81
WAN for Enterprise Networks 20%
76
Network Services 20%
58
Automation 10%
84

Study next: Network Services. It is below the pass mark and carries 20% of the exam.

Domains and pass mark from our 300-420 practice tests. Scores are an example attempt.

Study plans

Two weeks

  1. Day 1: take practice test 1 in exam mode to get a baseline.
  2. Days 2 to 5: domain mode on Advanced Addressing and Routing Solutions and Advanced Enterprise Campus Networks, the two most heavily weighted domains.
  3. Day 6: practice test 2 in exam mode, then the mistakes quiz.
  4. Days 7 to 12: practice tests 3 to 5, one every other day, each followed by its mistakes quiz.
  5. Days 13 and 14: final mode. Book the exam when your readiness stays above the pass mark.

Four weeks

  1. Week 1: one practice test in practice mode, reading every explanation. Note your two lowest domains.
  2. Week 2: domain mode on those two domains, then a second practice test in exam mode.
  3. Week 3: practice tests 3 and 4 in exam mode, with the mistakes and flagged quizzes after each.
  4. Week 4: practice test 5 and final mode until your readiness holds above the pass mark.

Questions about the 300-420 practice exams

Are these real 300-420 exam questions?
No. We write every question ourselves and map it to the published 300-420 exam objectives. We do not use leaked or recalled questions.
Do the time limit and pass mark match the official exam?
They match the settings of our practice tests. Exam providers change their format from time to time, so check the official exam page before you book.
Can I try it before I pay?
Yes. The free mini exam has 15 questions with full explanations and needs no account.
How long do I keep access?
A single-exam purchase gives you 12 months of access. All-Access includes this exam for as long as your subscription runs.
What happens after I finish a test?
You get a score, a pass or fail against the pass mark, a score per domain and every answer with its explanation.

Last updated November 2026. Written and reviewed by the DevOpsCode Lab team.

DevOpsCode Lab is not affiliated with Cisco. 300-420 and related names are trademarks of their owners.

Related exams
Exam Vendor Level Questions Minutes Price
100-140Cisco CCST IT Support 100-140 Cisco Foundational 225 50 $9.99
100-150Cisco CCST Networking 100-150 Cisco Foundational 226 50 $9.99
AZ-700Azure Network Engineer AZ-700 Microsoft Associate 250 100 $12.99
HPE6-A86HPE6-A86 HPE Network Switching Associate HPE Associate 300 90 $12.99
JN0-106JNCIA-Junos JN0-106 Juniper Networks Associate 300 90 $12.99
N10-009CompTIA Network+ N10-009 CompTIA Associate 451 90 $12.99