JN0-106

JNCIA-Junos JN0-106 practice exams

290 questions in 5 timed practice tests. Each test has about 60 questions and a 90-minute limit. The pass mark is 70%. Results are split across the 7 exam domains.

Exam at a glance

JN0-106 practice exam settings
Practice tests 5
Questions in total 290
Questions per test About 60
Time limit per test 90 minutes
Pass mark 70%
Question types Single answer and multiple answer (25 multiple-answer questions)
Level Associate
Category Networking

These are the settings of our practice tests. Check the official Juniper Networks exam page for the current exam format before you book.

Domains and weights

JN0-106 exam domains, weights and question counts
Domain Weight Weight bar Questions in our bank
Networking Fundamentals 15% 43
Junos OS Fundamentals 10% 29
User Interfaces 16% 46
Configuration Basics 18% 52
Operational Monitoring and Maintenance 14% 41
Routing Fundamentals 13% 38
Routing Policy and Firewall Filters 14% 41

Sample questions

Question 1 of 3

A provider must hold a customer to 50 Mbps. What is the key difference between policing and shaping the customer's traffic?

  1. A Policing and shaping both buffer the excess, and they differ only in the queue depth that they use
  2. B Policing drops or re-marks traffic above the rate, while shaping buffers the excess and sends it later (correct answer)
  3. C Policing can be applied only to outbound traffic, while shaping can be applied only to inbound traffic
  4. D Policing buffers excess traffic and sends it later, while shaping drops anything above the rate
Why: A policer enforces a rate by discarding or re-marking out-of-profile traffic immediately, whereas a shaper queues excess traffic and releases it at the configured rate, which adds delay but avoids drops. The buffering roles are reversed in one distractor. Policers can be applied in either direction and shaping is an egress function, so the direction claim is backwards, and policers do not buffer at all.

Question 2 of 3

In one VLAN, an Ethernet switch has six hosts connected directly to six ports and a seventh port connected to a hub that serves four more hosts. How many collision domains does this segment contain?

  1. A Ten: one for each host, because the switch isolates every attached end device
  2. B One: the hub extends a single collision domain across every port of the switch
  3. C Two: one for the hub segment and one shared by all directly connected switch ports
  4. D Seven: one for the hub segment plus one for each directly connected host (correct answer)
Why: Each switch port is its own collision domain, so the six direct ports give six, and the port to the hub gives one more that all four hub hosts share, for seven. The switch cannot split the hosts behind the hub because the hub repeats every signal to all of its ports. A hub does not extend its collision domain into the switch, and switch ports never share a collision domain with each other.

Question 3 of 3

An MX router receives a high rate of transit packets whose TTL expires on arrival, for example from a traceroute flood. Which part of the router is mainly stressed, and why?

  1. A The control plane, because expired packets become exception traffic that needs ICMP time-exceeded replies (correct answer)
  2. B Neither part, because Junos silently drops packets with an expired TTL and never generates ICMP for them
  3. C The forwarding plane alone, because every TTL expiry is fully handled in the PFE without host-path involvement
  4. D The management plane, because ICMP error messages are always sourced from the fxp0 management interface
Why: A TTL-expired packet cannot be forwarded and requires an ICMP time-exceeded reply, so it is handled as exception traffic on the host path, which is why such traffic is rate-limited to protect the RE. It is not purely a forwarding-plane event. Junos does generate time-exceeded messages, which is how traceroute works, and they are not sourced from fxp0.

What your score report looks like

Example attempt, JN0-106 practice test 3

76%

Passed
Pass mark 70%

Score by exam domain
DomainWeightYour score%
Networking Fundamentals 15%
88
Junos OS Fundamentals 10%
81
User Interfaces 16%
76
Configuration Basics 18%
58
Operational Monitoring and Maintenance 14%
84
Routing Fundamentals 13%
72

Study next: Configuration Basics. It is below the pass mark and carries 18% of the exam.

Domains and pass mark from our JN0-106 practice tests. Scores are an example attempt.

Study plans

Two weeks

  1. Day 1: take practice test 1 in exam mode to get a baseline.
  2. Days 2 to 5: domain mode on Configuration Basics and User Interfaces, the two most heavily weighted domains.
  3. Day 6: practice test 2 in exam mode, then the mistakes quiz.
  4. Days 7 to 12: practice tests 3 to 5, one every other day, each followed by its mistakes quiz.
  5. Days 13 and 14: final mode. Book the exam when your readiness stays above the pass mark.

Four weeks

  1. Week 1: one practice test in practice mode, reading every explanation. Note your two lowest domains.
  2. Week 2: domain mode on those two domains, then a second practice test in exam mode.
  3. Week 3: practice tests 3 and 4 in exam mode, with the mistakes and flagged quizzes after each.
  4. Week 4: practice test 5 and final mode until your readiness holds above the pass mark.

Questions about the JN0-106 practice exams

Are these real JN0-106 exam questions?
No. We write every question ourselves and map it to the published JN0-106 exam objectives. We do not use leaked or recalled questions.
Do the time limit and pass mark match the official exam?
They match the settings of our practice tests. Exam providers change their format from time to time, so check the official exam page before you book.
Can I try it before I pay?
Yes. The free mini exam has 15 questions with full explanations and needs no account.
How long do I keep access?
A single-exam purchase gives you 12 months of access. All-Access includes this exam for as long as your subscription runs.
What happens after I finish a test?
You get a score, a pass or fail against the pass mark, a score per domain and every answer with its explanation.

Last updated November 2026. Written and reviewed by the DevOpsCode Lab team.

DevOpsCode Lab is not affiliated with Juniper Networks. JN0-106 and related names are trademarks of their owners.

Related exams
Exam Vendor Level Questions Minutes Price
JN0-352JNCIS-ENT JN0-352 Juniper Networks Professional 300 90 $14.99
JN0-650JN0-650 Enterprise Routing and Switching Juniper Networks Professional 300 90 $14.99
100-140Cisco CCST IT Support 100-140 Cisco Foundational 225 50 $9.99
100-150Cisco CCST Networking 100-150 Cisco Foundational 226 50 $9.99
200-301Cisco CCNA 200-301 v1.1 Cisco Associate 301 120 $12.99
AZ-700Azure Network Engineer AZ-700 Microsoft Associate 250 100 $12.99