HPE6-A86

HPE6-A86 HPE Network Switching Associate practice exams

290 questions in 5 timed practice tests. Each test has about 60 questions and a 90-minute limit. The pass mark is 73%. Results are split across the 5 exam domains.

Exam at a glance

HPE6-A86 practice exam settings
Practice tests 5
Questions in total 290
Questions per test About 60
Time limit per test 90 minutes
Pass mark 73%
Question types Single answer and multiple answer (24 multiple-answer questions)
Level Associate
Category Networking

These are the settings of our practice tests. Check the official HPE exam page for the current exam format before you book.

Domains and weights

HPE6-A86 exam domains, weights and question counts
Domain Weight Weight bar Questions in our bank
Networking Fundamentals and Architectures 24% 70
HPE Aruba Networking Products and Features 21% 61
Install, Configure, and Validate Wired Solutions 22% 64
Troubleshoot, Operate, and Maintain 17% 49
Manage and Monitor 16% 46

Sample questions

Question 1 of 3

Host A is supposed to be configured as 10.1.1.10/24 with default gateway 10.1.1.1, but a typo set its mask to 255.255.0.0. Host A now tries to reach server 10.1.2.20, which is in a different VLAN behind the router, and proxy ARP is disabled. What happens?

  1. A Host A treats 10.1.2.20 as local, sends an ARP request for it directly, and gets no reply (correct answer)
  2. B Host A broadcasts the IP packet itself to every host in 10.1.0.0/16 until the server replies
  3. C Host A sends the packet to its default gateway, which routes it normally to the server
  4. D Host A sends an ARP request for 10.1.1.1 and the router replies with the server's MAC
Why: With a /16 mask, Host A believes 10.1.2.20 is on its own subnet, so it ARPs for the server directly instead of for the gateway; because the server is in another VLAN and proxy ARP is off, no reply arrives and the traffic fails. The host never uses its gateway for destinations it considers local, a router answers ARP only for its own address unless proxy ARP is enabled, and hosts do not broadcast unicast IP packets.

Question 2 of 3

Users report that their PCs receive addresses from an unexpected 192.168.0.0/24 range after a visitor plugged in a consumer router. Which switch feature prevents this from recurring?

  1. A DHCP snooping with trusted ports only toward the legitimate DHCP servers (correct answer)
  2. B LLDP-MED network policies that push the correct VLAN to every connected PC
  3. C Dynamic ARP inspection configured on every access port without DHCP snooping
  4. D An IP helper address on each user VLAN pointing to the corporate DHCP server
Why: DHCP snooping drops DHCP server messages arriving on untrusted ports, so only the ports facing the real DHCP servers can offer leases. ARP inspection relies on the DHCP snooping binding table and does not block rogue offers by itself, an IP helper forwards requests to the right server but does not stop a rogue server from answering, and LLDP-MED policies apply to phones rather than DHCP.

Question 3 of 3

An architect must choose between a VSF stack of CX 6300 switches and a VSX pair of CX 6400 chassis for a building's aggregation layer. The requirement is that a software upgrade must never take the whole aggregation layer offline at once. Which choice best meets this and why?

  1. A The VSX pair, because both peers merge into one control plane while each one is upgraded
  2. B The VSF stack, because all members share one control plane and upgrade simultaneously
  3. C The VSF stack, because the standby member keeps forwarding while the conductor upgrades
  4. D The VSX pair, because each peer has its own control plane and can be upgraded separately (correct answer)
Why: VSX keeps independent control planes, so one peer can be upgraded and rebooted while the other continues forwarding, which avoids a full-layer outage. A VSF stack shares one control plane, so a stack-wide upgrade affects all members; claiming that VSF upgrades members while forwarding, or that VSX merges control planes, misstates how the technologies work.

What your score report looks like

Example attempt, HPE6-A86 practice test 3

78%

Passed
Pass mark 73%

Score by exam domain
DomainWeightYour score%
Networking Fundamentals and Architectures 24%
88
HPE Aruba Networking Products and Features 21%
81
Install, Configure, and Validate Wired Solutions 22%
76
Troubleshoot, Operate, and Maintain 17%
58
Manage and Monitor 16%
84

Study next: Troubleshoot, Operate, and Maintain. It is below the pass mark and carries 17% of the exam.

Domains and pass mark from our HPE6-A86 practice tests. Scores are an example attempt.

Study plans

Two weeks

  1. Day 1: take practice test 1 in exam mode to get a baseline.
  2. Days 2 to 5: domain mode on Networking Fundamentals and Architectures and Install, Configure, and Validate Wired Solutions, the two most heavily weighted domains.
  3. Day 6: practice test 2 in exam mode, then the mistakes quiz.
  4. Days 7 to 12: practice tests 3 to 5, one every other day, each followed by its mistakes quiz.
  5. Days 13 and 14: final mode. Book the exam when your readiness stays above the pass mark.

Four weeks

  1. Week 1: one practice test in practice mode, reading every explanation. Note your two lowest domains.
  2. Week 2: domain mode on those two domains, then a second practice test in exam mode.
  3. Week 3: practice tests 3 and 4 in exam mode, with the mistakes and flagged quizzes after each.
  4. Week 4: practice test 5 and final mode until your readiness holds above the pass mark.

Questions about the HPE6-A86 practice exams

Are these real HPE6-A86 exam questions?
No. We write every question ourselves and map it to the published HPE6-A86 exam objectives. We do not use leaked or recalled questions.
Do the time limit and pass mark match the official exam?
They match the settings of our practice tests. Exam providers change their format from time to time, so check the official exam page before you book.
Can I try it before I pay?
Yes. The free mini exam has 15 questions with full explanations and needs no account.
How long do I keep access?
A single-exam purchase gives you 12 months of access. All-Access includes this exam for as long as your subscription runs.
What happens after I finish a test?
You get a score, a pass or fail against the pass mark, a score per domain and every answer with its explanation.

Last updated November 2026. Written and reviewed by the DevOpsCode Lab team.

DevOpsCode Lab is not affiliated with HPE. HPE6-A86 and related names are trademarks of their owners.

Related exams
Exam Vendor Level Questions Minutes Price
HPE7-A01HPE7-A01 HPE Network Campus Access Pro HPE Professional 375 120 $14.99
HPE7-A08HPE7-A08 HPE Network Switching Professional HPE Professional 376 120 $14.99
100-140Cisco CCST IT Support 100-140 Cisco Foundational 225 50 $9.99
100-150Cisco CCST Networking 100-150 Cisco Foundational 226 50 $9.99
200-301Cisco CCNA 200-301 v1.1 Cisco Associate 301 120 $12.99
AZ-700Azure Network Engineer AZ-700 Microsoft Associate 250 100 $12.99